English
Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.
Caution
Please read the use instructions carefully and completely before using the appliance.
•The blades are very sharp! To avoid injuries,
please handle blades with utmost care.
•Always unplug the appliance when it is left un- attended and before assembling, disassembling, cleaning and storing.
•This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.
•Do not hold the motor part A nor the whisk gear box H under running water, nor immerse them in water.
•Braun electric appliances meet applicable safety standards. Repairs or the replacement of the mains cord must only be done by authorised service personnel. Faulty, unqualified repair work may cause considerable hazards to the user.
•Before plugging into a socket, check whether your voltage corresponds to the voltage printed on the bottom of the appliance.
•The appliance is constructed to process normal household quantities.
•Neither the beaker G , nor the chopper bowl (c) is
Description
AMotor part
BOn/off switch for variable speed
CTurbo switch
DButtons for releasing the working parts
EVariable speed regulator
FBlender shaft
GMeasuring beaker
HWhisk gear box
IWhisk
JChopper
Setting the speed
When activating switch B , the processing speed corresponds to the setting of variable speed regulator
E. The higher the setting, the faster the chopping results.
However, maximum processing speed can only be achieved by pressing the turbo switch C . You may
also use the turbo switch for instant powerful pulses without having to manipulate the speed regulator.
Depending on the application, we recommend the following speed settings:
Handblender 1...turbo
Chopper 1...turbo
Whisk 1...15
How to operate your handblender
The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milkshakes.
1.Insert the motor part A into the blender shaft F until it locks.
2.Introduce the handblender in the vessel, then press the on/off switch B or the turbo switch C .
3.To release the blender shaft after use, press buttons D and pull it off.
You can operate the handblender in the measuring beaker G , and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove first to protect your handblender from overheating.
How to operate your whisk
Use the whisk only for whipping cream, beating egg whites and mixing sponges and
1.Insert the whisk I into the whisk gear box H , then insert the motor part A into the gear box until it locks.
2.Place the whisk in a vessel and only then, press switch B to operate it.
3.To release, press buttons D and pull off the gear box. Then pull the whisk out of the gear box.
For best results:
•Do not use the beaker G , but a wider bowl.
•Move the whisk clockwise, holding it slightly inclined.
Whipped cream
Only whip up to 400 ml chilled cream (min. 30 % fat content, 4 – 8 °C).
Start with a low speed setting (1) and while whipping, increase the speed to setting 15.
Egg snow
Only whip up to 4 egg whites.
Start with a medium speed setting (7) and while beating, increase the speed to setting 15.
9
