Brother 855-X06 operation manual Knowing Your Sewing Machine, Accessories, Optional accessories

Page 5

———————

1 KNOWING YOUR SEWING MACHINE

 

 

 

 

1

ACCESSORIES

 

 

 

We have designed these accessories to help you easily perform most sewing tasks.

 

1.

2.

3.

4.

5.

6.

7.

8.

9.

 

No.

Part Name

Part Code

 

 

Americas

Others

1

Zigzag foot “J”

XC4901-021

(on machine)

 

 

 

2

Buttonhole foot “A”

XD1792-031

3

Zipper foot “I”

XE9369-001

4

Darning Plate

XC6063-021

5

Button sewing foot “M”

XE2137-001

No.

Part Name

Part Code

 

 

Americas

Others

6

Bobbin

SA156

SFB:

(One is on machine)

XA5539-151

 

 

7

Needle set

3-piece set:

XE5328-001

(90/14 needle)

2-piece set: XE7064-001

 

8

Oval screwdriver

XE5241-001

9

Foot controller

See page 5

Note

●The included accessories vary depending on the machine model.

Optional accessories

The following are available as optional accessories to be purchased separately. Depending on the model you purchased, the following accessory may be included with your machine.

1.

2.

3.

4.

5.

6.7.8.

No.

Part Name

Part Code

 

 

Americas

Others

1

Extra spool pin

XE2241-001

2

Twin needle

X57521-021

(2.0/75 needle)

 

 

 

3

Walking Foot

SA107

F034N:

XC2165-002

 

 

 

4

Quilting Foot

SA129

F005N:

XC1948-002

 

 

 

No.

Part Name

Part Code

 

 

Americas

Others

5

1/4-inch Quilting Foot

SA125

F001N:

XC1944-052

 

 

 

6

Narrow Hemmer Foot

SA127

F003N:

XC1945-002

 

 

 

7

Blind Stitch Foot

SA134

F018N:

XC1976-052

 

 

 

8

Quilting guide

SA132

F016N:

XC2215-002

 

 

 

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sewing Machine Important Safety Instructions Save These Instructions Contents Optional accessories AccessoriesKnowing Your Sewing Machine Part Name Part Code Americas OthersFlat bed attachment Main PartsConnect the foot controller plug to the machine Using Your Sewing MachineConnecting plugs Foot controller Main power and sewing light switchChecking the needle Replacing the needleChanging the presser foot Controls Presser foot installation orientationPattern selection dial Stretch stitchingStitches Only available on certain models Patterns and stitch namesStitches Pattern Stitch Name Recommended0-3/16 Fixed Stitch width dial Stitch length dialWinding the bobbin Threading the MachineReverse sewing lever Turn on the machine Pull up the spool pin and put a spool of thread on this pinLower threading Install the bobbin wound with threadGroove Projection Lower threading for models equipped with a quick-set bobbinUpper threading Guide Turn off the machine Raise the presser foot leverNeedle holder Needle threader lever Pull the thread through the needle Pull on the upper thread to draw up the lower thread Drawing up the lower threadFor models equipped with a quick-set bobbin Replace the bobbin coverBall point needle FABRIC, THREAD, and Needle CombinationsTransparent nylon thread Fabric Type/Application Thread Size of NeedleStarting sewing Sewing BasicsPlease read before sewing Sewing thick fabrics Trial sewingChanging the sewing Direction Sewing stretch fabrics Sewing thin fabricsStitching cylindrical pieces Sewing with a twin needle OptionSelect a stitch Attaching the extra spool pinThread the left needle Thread the right needleUpper tension is too loose Thread tensionCorrect tension Upper tension is too tightStraight stitching BUILT-IN StitchesZigzag stitching Blind hem stitchingFold the fabric along the desired edge of the hem, and press Sew at a slow speed Adjust the thread tension so that it is tighter than normalElastic stitching Fagoting Double action stitchingJoining fabric Set the stitch width toStitch Overedge stitchingPattern Stitch Triple zigzag stretch stitching Feather stitchingDecorative stitching Stitch Name PatternMaking a buttonhole 1-step automatic buttonhole Sewing Buttonholes and ButtonsMaking a buttonhole Openbutton.the button plate and insertLower the buttonhole lever and push it back slightly If the button does not fit in the button guide plateYou need to sew the front bar tack first Making a buttonhole on stretch fabrics Adjusting buttonholesFollow steps 1 to 6 from Making a buttonhole on Piece of fabric to observe how Material is fedAt a slow speed, sew about 10 stitches Sewing buttonsThen tie it with the bobbin thread Any Sewing DarningWhen you have finished sewing, remove the basting stitching Using Attachments and ApplicationsZipper insertion Prepare the fabric with the zipper basted on the wrong sideDarning GatheringAppliqués Baste the cut design to the fabricUsing the blind stitch foot Optional AccessoriesWhen edge stitching Turn off the machine When sewing seams Turn off the machinePrecautions on storing the machine MaintenanceCleaning AppendixInstall the needle plate, and then tighten the screws Symptom Possible cause How to put it right TroubleshootingLower Thread BreaksThread is Tangled orThreader can Stitches are SkippedNot be used Stitch isNumerics IndexEnglish
Top Page Image Contents