C. WATER FLOW THROUGH THE SOFTENER VALVE
SERVICE CYCLE
from Valve Inlet
(hard water)
top | distributor |
To Valve Outlet |
|
(soft water) | resin tank |
resinposition
b_d __ | switch |
bottom distributor
Hard water enters the valve inlet port. Internal valve porting routes the
water down and out the top distributor, into the resin tank. Hard water is
softened as it passes through the resin bed, then enters the bottom
distributor. Soft water flows back into the valve and out the valve outlet, to the house soft water pipes.
FILL | CYCLE |
position switch | valve cam |
venturi |
|
| rotor & disc |
fill flow |
|
plug | from Valve Inlet |
| (hard water) |
fill water |
|
Isoft) | top distributor |
To Valve Outlet |
|
(soft water) |
|
l_:_n _ _]L r_s_n
To begin a regeneration, the electronic timer energizes the circuit to the valve motor. The valve motor rotates the rotor and disc and the valve cam until the
position switch lever drops, to open the motor circuit and position the vane in FILL. As the rotor and disc rotates, the port opens for SOFT water fill through
the venturi. Fill flow continues to the brine valve, and into the salt storage
tank. Soft water is still available to the house lines.
Problems, Questions? Call