Diamond Power Products GXSF27B, GXSF39B Programming the Control, SmartWater Softener System

Page 9

Programming the Control

CONTROL SETTINGS REQUIRED upon installation and

 

after an extended power outage.

Display

NOTES:

 

•WHEN THE TRANSFORMER IS PLUGGED INTO THE ELECTRICAL OUTLET (see step 9), 12:00 AM (flashing), and PRESENT TIME show in the display area. Program the

control as instructed below. If SR - - is flashing, use the UP (+)

button to set the correct SR code as follows: SR18 for GNSF18, SR35 for GNSF35, SR31 for GXSF39, or SR22 for GXSF27. If you pass by the correct code number, use the

DOWN (-) button. Then press the SELECT button and program the control.

•A “beep” sounds while pressing buttons for control programming. One beep signals a change in the control display. Repeated beeps mean the control will not accept a change from the button you have pressed, and you should use another button.

•To program the control, you will use the UP (+) , DOWN (-) and SELECT buttons.

UP (+) button

SmartWater Softener System

DOWN (-) button

RECHARGE TONIGHT

TOUCH

 

 

 

 

 

RECHARGE NOW

 

or

TIME

SELECT

 

 

HOLD

HARDNESS

 

 

 

 

TOUCH or HOLD button

SELECT button

SET PRESENT TIME OF DAY

PM

PRESENT TIME

SET REGENERATION (STARTING) TIME

NOTE: If the words PRESENT TIME do not show in the display, press the SELECT button until they do.

1.Press the UP (+) or DOWN (-) button to set. The UP button moves the display ahead; the DOWN button moves the time backward.

If the present time is between noon and midnight, be sure PM

shows .

PM

PRESENT TIME

NOTE: Each press of an UP (+) or DOWN (-) button changes the time by one minute. Holding the button in changes the time

32 minutes each second .

AM

NOTE: RECHARGE TIME and a flashing 2:00 AM (factory default) should show in the display. This is a good time for regeneration to start (over in about 2 hours) in most households because water is not in use. HARD WATER is bypassed to house faucets during regeneration.

If no change is needed, go to step 2. To change the regeneration starting time, follow step 1.

1.Press the UP (+) or DOWN (-) button to set the desired regeneration start time.

NOTE: Each press of the buttons changes the time by 1 hour. Holding the buttons in changes the time twice each second.

2.Press the SELECT button once more.

PRESENT TIME

2. When the present time shows, press SELECT to set. If the present

Be sure to observe the AM or PM, as you did when setting the time of day.

AM

RECHARGE TIME

time is between midnight and noon, be sure AM shows.

SET WATER HARDNESS NUMBER

NOTE: If 15 (factory default) and

HARDNESS

HARDNESS do not show in the display, press SELECT until they do.

1.Press the UP (+) or DOWN (-) button to set your water hardness number in the display. DOWN (-)moves the display down to 1. UP (+) moves the maximum setting.

NOTE: Each press of a button changes the display by 1 between 1 and 25. Above 25, the display changes 5 at a time (25, 30, 35, etc.). Holding a button in changes the numbers twice each second.

2.When your water hardness number shows, press SELECT to set.

NOTE: If there is clear water iron in your water supply, you will need to increase the hardness setting by 5 for each 1 ppm of clear water iron in your water supply.

You can get the grains per gallon (gpg) hardness of your water supply from a water analysis laboratory, or call and ask your local water department, if you are on a municipal supply, or call GE Answer Center® to request a water hardness test kit. If your report shows hardness in parts per million (ppm) simply divide by 17.1 to get the equivalent number of grains per gallon.

The display shows the present time of day and RECHARGE TONIGHT.

PM

RECHARGE TONIGHT

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Water Softening system Two easy ways to register your appliance GE & You, a Service PartnershipSafety Precautions Installation instructions Important Installation RecommendationsUnpacking and Inspection Plan How You Will Install the Softener Where to Install the SoftenerTools and Materials Required for Installation Optional 3-Valve Bypass Installation Illustration Typical Installation IllustrationInstall Bypass Valve Step-by-step installation instructionsProgram the Control SmartWater Softener System Programming the ControlSanitizing Procedures SPECIFICATIONS/DIMENSIONS GNSF18 GXSF27 GNSF35 GXSF39 About the water softener system Breaking a Salt Bridge Cleaning the Nozzle and Venturi Assembly Feature Program Memory Feature Optional Recharge ControlsFeature/Service Automatic Electronic Diagnostics Normal Operation, Control DisplaysService Timer/Softener, Service Checkout Procedure To remove an error code 1 Unplug transformerERR Open a Nearby Soft Water Faucet If the water softening system does not draw brine, check Care and cleaning of the water softening system Cleaning Iron Out of the Water Softening SystemChecking the Salt Storage Level and Refilling Problem Possible Causes What To Do No soft water Before you call for service…Not using any salt After installation Water softening systemAfter installation Water feels slipperyResin beads showing Is cloudy Error Code on controlUp in drinking water Sink Sounds you might hear Water has air bubblesPage Page We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Parts list 153 Parts catalog Spacer For The Period GE Will Replace GE Water Softening System WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYGE Answer Center Service Telephone Numbers

GXSF27B, GXSF39B, GNSF18Z01, GNSF35Z01 specifications

Diamond Power Products is well-known for its innovative solutions in the field of industrial equipment, and its GNSF35Z01, GNSF18Z01, GXSF39B, and GXSF27B models stand out for their advanced technologies and robust features. Each of these products is designed with a clear focus on enhancing performance, efficiency, and reliability in various industrial applications.

The GNSF35Z01 is notable for its exceptional power output and durability. It is engineered with a high-performance motor that ensures consistent operation even under demanding conditions. One of its key features is its energy-efficient design, which not only reduces operational costs but also minimizes environmental impact. Additionally, this model incorporates advanced cooling technologies to prevent overheating, thereby prolonging its lifespan and ensuring sustained productivity.

Similarly, the GNSF18Z01 is aimed at users who require a compact yet powerful solution. This model excels in versatility, making it suitable for a wide range of tasks. Its lightweight structure enables easy handling, while its robust construction guarantees durability. The GNSF18Z01 also features smart control technologies that optimize its performance, allowing operators to achieve precise results with minimal effort.

On the other hand, the GXSF39B model focuses on high throughput and efficiency. Its innovative design includes enhanced flow management systems that maximize performance during operation. This model is particularly favored in applications where speed and efficiency are critical. The GXSF39B is equipped with user-friendly interfaces, which simplify operation and maintenance, making it an indispensable tool in any industrial setting.

The GXSF27B is another significant addition to Diamond Power’s lineup. It is specially crafted to handle heavy-duty applications with ease. The robust frame and high-quality components ensure that it can withstand rigorous use. Its advanced safety features provide operators with peace of mind, knowing that operational safety is prioritized. This model also embraces modern technologies, such as IoT capabilities, allowing for real-time monitoring and data analysis, which can enhance decision-making processes.

In conclusion, the GNSF35Z01, GNSF18Z01, GXSF39B, and GXSF27B models from Diamond Power Products showcase cutting-edge technologies and exceptional features. These products exemplify the brand's commitment to providing reliable, efficient, and versatile solutions for the industrial sector, enabling businesses to operate at peak performance while meeting their environmental responsibilities. Whether for high efficiency, compact design, or heavy-duty applications, Diamond Power Products delivers equipment that aligns with the evolving needs of modern industries.
Top Page Image Contents