Furuno GP-1850F manual 11-11, UPLOAD/DOWNLOAD Data menu, Xon/Xoff, Download waypoint/route to PC

Page 79

UPLOAD/DOWNLOAD DATA menu

This menu allows you to upload waypoint and route data to a PC or download the same data from a PC, via the DGPS connector at the back of display unit. The menu can be displayed by pressing the [MENU] key fol- lowed by the soft keys CONFIGURATION and UPLOAD/DOWNLOAD DATA. For de- tailed information, see the Installation Manual. For memory card, see chapter 10.

DWNLOAD

UPLOAD

DOWNLOAD WPT/RTE TO PC

UPLOAD WPT/RTE FROM PC

SAVE DATA TO MEMORY CARD

LOAD DATA FROM MEMORY CARD

DGPS 3D

 

RETURN

 

 

 

Figure 11-20 Upload/download menu

 

 

 

 

 

+ GND

 

 

 

 

 

1

3

 

 

 

 

 

 

2

 

 

 

 

 

 

-

ANT

XDR

TEMP/SPD

DGPS

NMEA

12

- 24

VDC

Connect PC to DGPS.

Figure 11-21 Display unit, rear view

Set communication software on the PC as follows:

Baud Rate:

4800 bps

Character Length:

8 bit

Stop bit:

1 bit

Parity:

None

X Control:

XON/XOFF

The following data can be downloaded/up- loaded between a personal computer and this equipment:

Waypoint data (In alphanumeric order)

Route data (In order of route number)

End of sentence

Note 1: There are two kinds of data for route

data: route data and route comment data.

Note 2: DGPS position fix is not available when uploading or downloading data.

Download waypoint/route to PC

1.Connect the PC to the equipment as shown on the next page.

2.Press the soft key labeled DOWNLOAD WPT/RTE TO PC. You are asked if you are ready to download waypoints and routes.

3.Press the [ENTER] key to download.

Upload waypoint/route from PC

Note that all waypoint and route data stored in this unit will be deleted when data is up- loaded.

1.Connect the PC to the equipment as shown on the next page.

2.Press the soft key labeled UPLOAD WPT/ RTE FROM PC. You are asked if you are ready to upload waypoints and routes.

3.Press the [ENTER] key to upload.

11-11

Image 79
Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER First E D I T I O N FEB OCT Do not operate the equipment with wet hands About the TFT LCDDo not open the equipment Do not disassemble or modify the equipmentTable of Contents Iii Declaration of ConformityForeword FeaturesWord to GP-1850DF/1850F Owners Display Unit System ConfigurationThis page is intentionally left blank Display Unit Controls Operational OverviewRemote controller Remote ControllerDisplay abbreviations Inserting Mini Chart CardTurning the Power On/Off Turning the power offPlotter Displays Adjusting Tone and BrillianceSelecting a display Normal Sounder Display Sounder DisplaysMenu Operation, Soft Keys Plotter/Sounder DisplayDemonstration Display 11 Demo setting screenPrinciple of Operation Video Sounder OperationNormal sounder display indications, markers Sounder Display DescriptionKHz picture Bottom-lock display Selecting sounder display modeBottom-zoom display Marker zoom displayEnter Plotter/Sounder DisplayDual-frequency Display Scope displayManual Sounder Operation Automatic Sounder OperationRange shifting Adjusting the gainMeasuring Depth Selecting display rangeSuppressing Interference Sounder Setup OptionsSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedBackground and echo colors Alarms Bottom echo Interpreting the DisplayZero line Fish school echoes34 Surface noise/aeration Surface noise/AerationCourse-up Plotter DisplaysPresentation Modes North-upShifting the Display Selecting Chart Scale/RangeMini Chart Cards CursorFuruno mini chart card Indices and chart enlargementRemarks on chart display Chart symbolsComparison of Furuno and Nav-Charts chart cards Port service icons Nav-Charts cardsAid to navigation data Enlarging an indication Navigation Data DisplayGPS satellite monitor display Steering Display How to read the compass displayBeacon information display Setting the range of the XTE scale How to read the XTE scaleHighway Display Fishing Changing Operation ModeFifure 3-16 Display setup1 menu Navigation Trip DistanceDisplaying Track TrackTracking Track plotting method Stopping/Restarting Plotting of TrackChanging Track Color Track Plotting Method, IntervalTrack plotting interval Changing Track Memory CapacityTrack Memory Erasing All Track Entering Marks MarkPlotter display Video sounder display Changing Mark AttributesTions Changing Mark SizeSmall Erasing whole marks/lines Erasing MarksDisplaying Track and Mark Points Erasing individual marks/linesEntering waypoints at MOB position WaypointsEntering Waypoints Entering waypoints at own ship’s positionChanging the shape and color of waypoint mark Waypoint menuChanging waypoint position Changing waypoint name, comment, proximity alarm radiusEntering waypoints by range and bearing Entering waypoints by latitude and longitude positionErasing waypoints by the cursor Erasing Individual WaypointsChanging Waypoint Data Erasing waypoints through the waypoint listChanging Waypoint Position on the Plotter Display Waypoint Mark SizeSearching Waypoints This page is intentionally left blank Abcdef RoutesEntering Routes Entering routes through the route listInserting waypoints through the route list Connecting RoutesInserting, Removing Waypoints Entering routes by the cursorWPT Inserting waypoints on the plotter displayRemoving waypoints from routes Alph ListRemoving route waypoints from the plotter display Creating Track-based RoutesSave icon appearance On the plotter display Erasing RoutesThis page is intentionally left blank Navigating to a single quick point NavigationNavigating to Quick Points Selecting quick point entry methodNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesNavigate along specific leg of route Following a RouteNavigate route waypoints in reverse order Navigate directly to a route waypointSwitching waypoints Setting speed for ETA calculationRestarting navigation Cancelling Navigation This page is intentionally left blank Introduction Plotter AlarmsAudio Alarm On/Off Arrival AlarmXTE Cross Track Error Alarm Anchor Watch AlarmProximity Alarm Speed AlarmAlarm messages Alarm InformationAlarm messages and their meanings Saving data Saving Data to Memory CardFormatting Memory Cards 10-1Data overwrite Error messageLoading Data from Memory Card 10-2Waypoint/route Configuration10-3 TrackThis page is intentionally left blank 11-1 Chart Setup Options menuChart Offset menu Customizing Your Unit11-2 Chart Details menuChart details menu description Display Options menu11-3 Display setup1 menu description11-4 Display SETUP2 menu description11.3 GPS/DGPS/TD Options menu GPS Setup Options menu description11-5 Dgps Setup Options Dgps Setup Options menu11-6 Displaying Loran C TDs TD Setup menuTD Setup 11-711-8 Sounder Setup Options menuRange Setup soft key Sounder Setup Options menu descriptionEcho Offset 200kHz, Echo Offset 50kHz System Setup soft keySystem Setup menu description 11-911-10 Configuration menuSetup Nmea Port 1 menu description Setup NMEA/DGPS Port 2 menu descriptionDownload waypoint/route to PC 11-11UPLOAD/DOWNLOAD Data menu XON/XOFF22 Connection of GP-1850DF GP-1850F to PC 11-12System menu 11-13System Menu description This page is intentionally left blank Using C-MAP NT Model Tidal Information Navigating to Ports, Port Services 12-4 Setting Chart Setup Options 20 Depth Info display 12-6Displaying Program Number This page is intentionally left blank 13-1 Maintenance & TroubleshootingMaintenance Recommended maintenance program13-2 Replacement of Fuse, BatterySimple Troubleshooting Simple troubleshooting plotter13-3 Error MessagesSimple troubleshooting sounder Error messagesTest Diagnostic Tests13-4 Memory, I/O port testKeyboard test 13-5Display test Clearing Memories Remote controller test13-6 Menu Tree Sounder Setup Options Audio Alarm ON, OFF Loran C Chains Decca Chains World Time Geodetic Chart List Plotter GeneralGPS Receiver Display SectionSounder Coating Color Index-1 IndexIndex-2 Index-3
Related manuals
Manual 63 pages 6.35 Kb

GP-1850F, GP-1850DF specifications

Furuno is renowned for its high-quality marine electronics, and the GP-1850DF and GP-1850F are no exceptions. These advanced GPS chart plotters are designed to meet the needs of both professional mariners and recreational boaters alike.

The GP-1850DF is equipped with a powerful 12-channel GPS that provides fast and accurate positioning information, while the GP-1850F features a sturdy built-in fish finder, making it ideal for anglers. Both units boast a brilliant color display that enhances visibility in various lighting conditions, ensuring that users can easily read information on the screen, even in direct sunlight.

One of the standout features of these models is their compatibility with a variety of chart formats, including C-MAP, and Furuno’s proprietary raster charts. This flexibility allows users to choose from a broad range of navigational charts, catering to specific regional needs and preferences. The intuitive interface of the GP-1850 series simplifies navigation, offering menu-driven commands and support for multiple languages.

Furuno has integrated advanced sonar technology in the GP-1850F model, including a high-resolution fish finder capable of detecting fish signatures with remarkable precision. The dual-frequency capabilities enable users to switch between higher frequencies for shallow water fishing and lower frequencies for deeper waters. This enriches the fishing experience while improving catch rates.

Moreover, both devices feature a built-in waypoint register, allowing users to store up to 1,000 waypoints, which can be essential for returning to promising fishing spots or navigating back to port. The navigation functions also include routes and track recording, empowering boaters to create custom paths and review their previous journeys.

The GP-1850 series also places a high emphasis on safety, incorporating features like man overboard (MOB) alarms and route alarms to enhance on-water safety. Additionally, they are designed to withstand the harsh marine environment, with waterproof housings that ensure durability during adverse weather conditions.

In conclusion, the Furuno GP-1850DF and GP-1850F models provide an exceptional combination of performance, reliability, and user-friendly features, making them a preferred choice for both fishermen and navigators. Their adaptability in various maritime situations, alongside advanced technologies, cements their reputation as essential tools for successful and safe voyages on the water.