Furuno manual 11-12, Connection of GP-1850DF GP-1850F to PC

GP-1850DF/1850F

DGPS

1NC

2NC

3RD (YELLOW)

4NC

5SD (RED)

6SG (BLUE)

7SHIELD

PC/AT

DSUB 9-pin

(EIA-574)

3 (TxD)

2 (RxD)

5 (GND)

4 (DTR)

6 (DSR)

7 (RTS) 8 (CTS)

PC/AT
DSUB 25-pin
(EIA-232)
2	(TxD)
3	(RxD)
7	(GND)
4	(DTR)
5	(DSR)
6	(RTS)
20 (CTS)

Figure 11-22 Connection of GP-1850DF/

GP-1850F to PC

Waypoint data format

PFEC, GPwpl, llll.llll,	a,	yyyyy.yyy,	a, c	----c,	c,	c----	c, a <CR><LF>
1	2	3	4	5	6	7	8

Figure 11-23 Waypoint data format

1:Waypoint latitude

2:N/S

3:Waypoint longitude

4:E/W

5:Waypoint name (Number of characters is fixed to 6 and space code is placed when the number of characters are less than 6.)

6:Waypoint color

7:Waypoint comment (1 byte for mark code + 13 characters of comment.)

1st byte of mark code: Fixed to ‘@’.

2nd byte of mark code: Internal mark code. See Note 1.

8.Information of marking waypoint. Always set to “A”.

“A”: Displayed

“V”: Not displayed

_ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789&’#

=9	=:	=;	=<	= =
=>	=?	=@		=A
=B	=C	=D		=E
=F		=G		=H

Figure 11-24 Character available for comment

Route data menu

$GPRTE, x, x, a, ccc, c				----	----c, c		----c, ... , c c <CR><LF>
1	2	3	4	5		6		12

Figure 11-25 route data format

1:Number of sentences required for one complete route data (1 to 4 ). See Note 2.

2:Number of sentences currently used (1 to 4)

3:Message mode (Always set to C)

4:Route No. (001 to 300, 3 digits required)

5 through 12: Waypoint name (Max. 8 names, length of each waypoint name is fixed to 7 byte)

Note 1: Following characters can be used for comments:

11-12