Furuno GP-1850DF, GP-1850F manual Clearing Memories, 13-6, Remote controller test

Remote controller test

This test checks the controls of the remote controller for proper operation.

1.Press the [MENU] key followed by the soft keys CONFIGURATION, SYSTEM MENU and SELF TEST to display the self test menu.

2.Press the soft key REMOTE CONTROL- LER TEST to display the screen for test- ing the remote controller.

REMOTE

TEST

PRESS "CLEAR" KEY 3 TIMES

TO RETURN.

RETURN

Figure 13-7 Remote controller test

3.Press the any key. The pressed key’s on- screen location turns black if the key is functioning properly.

4.To escape, press the soft key RETURN on the display unit, or press the [CLEAR] key three times on the remote controller.

13.6 Clearing Memories

The memory, which stores marks, tracks and initial settings, can be cleared to start afresh. When this done all default settings are re- stored.

1.Press the [MENU] key followed by the soft keys CONFIGURATION and SYSTEM MENU.

2.Press the soft key MEMORY/TRIP CLEAR to open the clear memory menu.

		CLEAR
		MEMORY
s CLEAR PLOTTER MEMORY NO		EDIT
CLEAR GPS MEMORY	NO
CLEAR ALL MEMORY	NO
TRIP METER RESET	NO

DGPS 3D
	RETURN

Figure 13-8 Clear memory menu

3.Press ▲ or ▼ to select memory/trip to clear.

4.Press the soft key EDIT.

5.Press ▲ to select YES.

6.Press the soft key ENTER or the [ENTER] key to clear memory/trip selected.

Note: For CLEAR PLOTTER MEMORY and CLEAR ALL MEMORY, all waypoints and routes are cleared and default settings are restored. If you require this data, save it to a PC.

13-6