Furuno GP-1850DF, GP-1850F manual Sounder Setup Options

Page 98
CLEAR PLOTTER MEMORY (NO, YES) CLEAR GPS MEMORY (NO, YES) CLEAR ALL MEMORY (NO, YES)
TRIP METER RESET (NO, YES)

1

SOUNDER SETUP OPTIONS

Soft key SYSTEM SETUP

NOISE LIMITER (OFF, NL1, NL2, NL3) CLUTTER (AUTO, 0-9)

WHITE MARKER [0-16 (or 0-8), Default: 0]

HUE (1-9, Default: 1)

SIGNAL LEVEL [SL1, SL2, SL3, SL4, SL5, SL6 (or SL1, SL2, SL3), Default: OFF] PICTURE ADVANCE (2/1, 1/1, 1/2, 1/4, 1/8, STOP)

E/S WINDOW (STD, WIDE)

: When 8 is selected in HUE window

FISH ALM LVL (HIGH, NORMAL, LOW)

TX POWER (ON, OFF)

TVG 200 kHz (0-9, Default: 5)

TVG 50 kHz (0-9, Default: 5)

ECHO OFFSET 200 kHz (-20 - +20, Default: 0)

ECHO OFFSET 50 kHz (-20 - +20, Default: 0)

SEABED LVL 200 kHz (20-200, Default: 80)

SEABED LVL 50 kHz (20-200, Default: 80)

Soft key RANGE SETUP

RANGE1 (Default: 15 ft)

RANGE2 (Default: 30 ft)

RANGE3 (Default: 60 ft)

RANGE4 (Default: 120 ft) Setting range: 7-4000 ft

RANGE5 (Default: 200 ft)

RANGE6 (Default: 400 ft)

RANGE7 (Default: 1000 ft)

RANGE8 (Default: 4000 ft)

ZOOM RANGE (7-4000 ft, Default: 30 ft)

B/L RANGE (10, 20 ft)

CONFIGURATION

SETUP NMEA PORT 1

SETUP NMEA/DGPS PORT 2

SELECT SNTNC. soft key

FORMAT (NMEA0183Ver.1.5, 2.0)

LAT/LON FORMAT

(DD° MM.MM’, DD° MM.MMM’, DD° MM.MMMM)

FORMAT

(NMEA0183Ver.1.5, 2.0, RTCM104EX, RTCM104INTRN, RTCM104OUT)

LAT/LON FORMAT

(DD° MM.MM’, DD° MM.MMM', DD° MM.MMMM)

(AAM, APB, BOD, BWC/BWR, DBT/DPT, GGA, GLL, MTW, RMA, RMB, RMC, VTG, WPL, XTE, ZDA)

UPLOAD/DOWNLOAD DATA

 

 

 

 

DOWNLOAD WAYPOINT/RTE TO PC

 

 

 

 

 

 

 

UPLOAD WAYPOINT/RTE FROM PC

 

 

 

 

 

 

 

 

 

 

SAVE DATA TO MEMORY CARD

 

 

 

 

 

 

 

 

 

 

LOAD DATA FROM MEMORY CARD

 

 

 

 

SYSTEM MENU

 

 

SELF TEST (MEMORY, I/O; KEYBOARD;

 

 

 

 

 

TEST PATTERN, REMOTE CONTROLLER

 

 

 

TEST)

 

 

 

DEMONSTRATION MODE

 

 

 

 

 

 

MEMORY/TRIP CLEAR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A-2

Image 98
Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER First E D I T I O N FEB OCT Do not disassemble or modify the equipment About the TFT LCDDo not open the equipment Do not operate the equipment with wet handsTable of Contents Declaration of Conformity IiiWord to GP-1850DF/1850F Owners FeaturesForeword System Configuration Display UnitThis page is intentionally left blank Operational Overview Display Unit ControlsRemote Controller Remote controllerTurning the power off Inserting Mini Chart CardTurning the Power On/Off Display abbreviationsSelecting a display Adjusting Tone and BrilliancePlotter Displays Plotter/Sounder Display Sounder DisplaysMenu Operation, Soft Keys Normal Sounder Display11 Demo setting screen Demonstration DisplayVideo Sounder Operation Principle of OperationKHz picture Sounder Display DescriptionNormal sounder display indications, markers Marker zoom display Selecting sounder display modeBottom-zoom display Bottom-lock displayScope display Plotter/Sounder DisplayDual-frequency Display EnterAutomatic Sounder Operation Manual Sounder OperationSelecting display range Adjusting the gainMeasuring Depth Range shiftingSuppressing Low Level Noise Sounder Setup OptionsSuppressing Interference Erasing Weak Echoes White MarkerBackground and echo colors Selecting Picture Advance SpeedSelecting Background and Echo Colors Alarms Fish school echoes Interpreting the DisplayZero line Bottom echoSurface noise/Aeration 34 Surface noise/aerationNorth-up Plotter DisplaysPresentation Modes Course-upCursor Selecting Chart Scale/RangeMini Chart Cards Shifting the DisplayChart symbols Indices and chart enlargementRemarks on chart display Furuno mini chart cardAid to navigation data Port service icons Nav-Charts cardsComparison of Furuno and Nav-Charts chart cards GPS satellite monitor display Navigation Data DisplayEnlarging an indication Beacon information display How to read the compass displaySteering Display Highway Display How to read the XTE scaleSetting the range of the XTE scale Navigation Trip Distance Changing Operation ModeFifure 3-16 Display setup1 menu FishingTracking TrackDisplaying Track Track Plotting Method, Interval Stopping/Restarting Plotting of TrackChanging Track Color Track plotting methodTrack Memory Changing Track Memory CapacityTrack plotting interval Erasing All Track Plotter display MarkEntering Marks Changing Mark Attributes Video sounder displaySmall Changing Mark SizeTions Erasing individual marks/lines Erasing MarksDisplaying Track and Mark Points Erasing whole marks/linesEntering waypoints at own ship’s position WaypointsEntering Waypoints Entering waypoints at MOB positionWaypoint menu Changing the shape and color of waypoint markEntering waypoints by latitude and longitude position Changing waypoint name, comment, proximity alarm radiusEntering waypoints by range and bearing Changing waypoint positionErasing waypoints through the waypoint list Erasing Individual WaypointsChanging Waypoint Data Erasing waypoints by the cursorSearching Waypoints Waypoint Mark SizeChanging Waypoint Position on the Plotter Display This page is intentionally left blank Entering routes through the route list RoutesEntering Routes AbcdefEntering routes by the cursor Connecting RoutesInserting, Removing Waypoints Inserting waypoints through the route listAlph List Inserting waypoints on the plotter displayRemoving waypoints from routes WPTCreating Track-based Routes Removing route waypoints from the plotter displayErasing Routes Save icon appearance On the plotter displayThis page is intentionally left blank Selecting quick point entry method NavigationNavigating to Quick Points Navigating to a single quick pointNavigating to Ports, Port Services Navigating to Waypoints waypoint listNavigate directly to a route waypoint Following a RouteNavigate route waypoints in reverse order Navigate along specific leg of routeRestarting navigation Setting speed for ETA calculationSwitching waypoints Cancelling Navigation This page is intentionally left blank Arrival Alarm Plotter AlarmsAudio Alarm On/Off IntroductionAnchor Watch Alarm XTE Cross Track Error AlarmSpeed Alarm Proximity AlarmAlarm messages and their meanings Alarm InformationAlarm messages 10-1 Saving Data to Memory CardFormatting Memory Cards Saving data10-2 Error messageLoading Data from Memory Card Data overwriteTrack Configuration10-3 Waypoint/routeThis page is intentionally left blank Customizing Your Unit Chart Setup Options menuChart Offset menu 11-1Display Options menu Chart Details menuChart details menu description 11-2Display setup1 menu description 11-3Display SETUP2 menu description 11-411-5 GPS Setup Options menu description11.3 GPS/DGPS/TD Options menu 11-6 Dgps Setup Options menuDgps Setup Options 11-7 TD Setup menuTD Setup Displaying Loran C TDsSounder Setup Options menu description Sounder Setup Options menuRange Setup soft key 11-811-9 System Setup soft keySystem Setup menu description Echo Offset 200kHz, Echo Offset 50kHzSetup NMEA/DGPS Port 2 menu description Configuration menuSetup Nmea Port 1 menu description 11-10XON/XOFF 11-11UPLOAD/DOWNLOAD Data menu Download waypoint/route to PC11-12 22 Connection of GP-1850DF GP-1850F to PCSystem Menu description 11-13System menu This page is intentionally left blank Using C-MAP NT Model Tidal Information Navigating to Ports, Port Services 12-4 Setting Chart Setup Options 12-6 20 Depth Info displayDisplaying Program Number This page is intentionally left blank Recommended maintenance program Maintenance & TroubleshootingMaintenance 13-1Simple troubleshooting plotter Replacement of Fuse, BatterySimple Troubleshooting 13-2Error messages Error MessagesSimple troubleshooting sounder 13-3Memory, I/O port test Diagnostic Tests13-4 TestDisplay test 13-5Keyboard test 13-6 Remote controller testClearing Memories Menu Tree Sounder Setup Options Audio Alarm ON, OFF Loran C Chains Decca Chains World Time Geodetic Chart List Display Section GeneralGPS Receiver PlotterSounder Coating Color Index Index-1Index-2 Index-3
Related manuals
Manual 63 pages 6.35 Kb

GP-1850F, GP-1850DF specifications

Furuno is renowned for its high-quality marine electronics, and the GP-1850DF and GP-1850F are no exceptions. These advanced GPS chart plotters are designed to meet the needs of both professional mariners and recreational boaters alike.

The GP-1850DF is equipped with a powerful 12-channel GPS that provides fast and accurate positioning information, while the GP-1850F features a sturdy built-in fish finder, making it ideal for anglers. Both units boast a brilliant color display that enhances visibility in various lighting conditions, ensuring that users can easily read information on the screen, even in direct sunlight.

One of the standout features of these models is their compatibility with a variety of chart formats, including C-MAP, and Furuno’s proprietary raster charts. This flexibility allows users to choose from a broad range of navigational charts, catering to specific regional needs and preferences. The intuitive interface of the GP-1850 series simplifies navigation, offering menu-driven commands and support for multiple languages.

Furuno has integrated advanced sonar technology in the GP-1850F model, including a high-resolution fish finder capable of detecting fish signatures with remarkable precision. The dual-frequency capabilities enable users to switch between higher frequencies for shallow water fishing and lower frequencies for deeper waters. This enriches the fishing experience while improving catch rates.

Moreover, both devices feature a built-in waypoint register, allowing users to store up to 1,000 waypoints, which can be essential for returning to promising fishing spots or navigating back to port. The navigation functions also include routes and track recording, empowering boaters to create custom paths and review their previous journeys.

The GP-1850 series also places a high emphasis on safety, incorporating features like man overboard (MOB) alarms and route alarms to enhance on-water safety. Additionally, they are designed to withstand the harsh marine environment, with waterproof housings that ensure durability during adverse weather conditions.

In conclusion, the Furuno GP-1850DF and GP-1850F models provide an exceptional combination of performance, reliability, and user-friendly features, making them a preferred choice for both fishermen and navigators. Their adaptability in various maritime situations, alongside advanced technologies, cements their reputation as essential tools for successful and safe voyages on the water.