Delta 16968-DST Series manual Faucet Inspection and Operation, Turn on hot and cold water supplies

Page 11

6

A.

3

 

 

 

 

 

 

 

 

4

 

 

 

2

 

 

 

1

 

 

 

1

 

 

B.

 

 

 

 

Lock

1

 

 

Unlock

 

Faucet Inspection and Operation

A.Turn on hot and cold water supplies

(1). Pull the hose assembly (2) out of the spout and remove the sprayer (3). Be sure to hold the end of the hose down into the sink and turn faucet handle (4) to the mixed position. Flush water lines for one minute.

IMPORTANT: This flushes away any debris that could cause damage to internal parts. Reinstall the sprayer.

Check all connections at arrows for leaks. Refer back to the appropriate installation instructions and retighten if necessary. If assembled correctly, check for damage to seals and order appropriate replacements.

B.Sprayer will lock into position when brought into proximity of the spout magnet. The sprayer can be removed by either pulling directly out from the spout or by twisting 90° in either direction which will cause the magnets to repel and the head to decouple from the spout (recommended). Check the operation of the sprayer by operating the trigger (1) from aerator to spray.

11

Image 11
Contents Talbott HIGH-RISE PULL-DOWN Kitchen Faucets Table of Contents Spout Installation When mounting Faucet InstallationFaucet Installation with 10 Escutcheon Hose Installation Water Line Connections Custom Fit Connections Potential Problems and RemediesIncorrect Installation Soap / Lotion Dispenser Installation Turn on hot and cold water supplies Faucet Inspection and OperationMaintenance Cleaning and Care Modelo 16968 Series Índice Instalación Del Tubo de Salida Instalación de la Llave de Agua/Grifo Instalación de la Llave de Agua/Grifo con una Chapa de Instalación de la Manguera Haga las Conexiones a las Líneas de Agua Conexiones Especiales Método Correcto Instrucciones para la Instalación del la Manga PlásticaInstalación Del Dispensador De la Loción / Del Jabón El Funcionamiento de la Llave de Agua y su Inspección Limpieza y Cuidado de su Llave MantenimientoModèle 16968 Seria Table DES Matières Autre méthode d’installation du flexible Installation De BecInstallation du robinet Installation de robinet avec la plaque de finition de 10 po Installation du tuyau souple Branchement à la tuyauterie Spéciaux Tuyauterie Branchement Bonne méthode Instructions d’installations de le manchon en plastiqueEnlevez la bouteille 1. Séparez la tête Installation De Distributeur De Savon / De LotionInspection et utilisation du robinet Et nettoyez-le Entretien Instructions de nettoyageRP52140 Sprayer Assembly RP49302 Page Delta Faucet Company Product Service Th Street Indianapolis,