1
A.
1
2
6
5
4
3
Alternative Hose Installation
B.
2
1
C.
1
Spout Installation
A.Insert hose guide (1) into hose end (2) as shown. Verify that the friction washer (3), clip (4) and spout ring (5) are present on spout assembly. Feed hose assembly (6) through spout and hub.
Alternative Hose Installation
An alternative to this method is to feed the hose through the spout and hub after they are mounted. Turn spout opposite handle for this method. It may take several attempts to feed hose using this method.
B.Align button (1) on clip with hole in back of spout (2). Using back and forth motion insert spout assembly onto main hub until clip button snaps into hole in hub. Use caution not to pinch fingers.
C.Attach sprayer (1) to end of hose to keep hose in place. Rotate spout assembly to ensure smooth operation.
3