Bradley Smoker MG-2/TT Connecting optional hot water heater, Screws AS Shown

Page 11

 

Express® Lavatory System - MG-Series with TouchTime® Control

Installation Instructions

MG-2/TT

 

 

Installation Instructions continued . . .

Step 6: Connecting optional hot water heater

NOTE: 240/208 or 277 voltage is required for hot water heater. Refer to the installation manual provided with the hot water heater for further installation information.

1.Remove the two screws from the back of the water heater. Attach the bracket with the screws as shown in Figure 6a.

2.Hang the water heater on the rear frame member to the right of the vertical frame member (see Figure 6b).

3.Connect the 1/2" flexible hose from the cold water supply stub-out to the hot water heater inlet.

4.Connect the 1/2" flexible hose from the hot water heater outlet to the supply inlet on the solenoid valve assembly.

WATER

HEATER

SCREWS

BRACKET (140-945)

REMOVE (2) SCREWS FROM

BACK OF WATER HEATER.

ATTACH BRACKET WITH

Figure 6a SCREWS AS SHOWN.

 

 

WATER HEATER EX95TMLB

 

 

 

 

MOUNTING CLIP

 

 

 

REFERENCE WATER HEATER

WATER HEATER EX95TMLB

FOR CLARITY,

 

INSTRUCTIONS FOR REQUIRED

 

(269-1767), 240V/208V

BOWL NOT SHOWN.

 

ELECTRICAL CONNECTIONS.

 

5-1/4" x 9-3/4" x 2-1/16"

 

 

 

 

 

HANG WATER HEATER

 

 

 

 

ON REAR FRAME MEMBER

 

 

 

 

TO THE RIGHT OF THE

 

 

 

 

VERTICAL FRAME MEMBER

 

 

 

 

VERTICAL FRAME

 

 

 

 

MEMBER

 

 

 

 

OUTLET

 

 

 

Figure 6b

INLET

2" (51mm)

COLD WATER

 

 

 

REF. ONLY

SUPPLY

 

 

COLD WATER

 

 

 

 

SUPPLY

 

 

 

OPTIONAL 240V/208V ELECTICAL

BOX LOCATION, 2-1/2" x 4"

 

RECOMMENDED 240V/208V

Figure 6c

ELECTICAL BOX LOCATION, 4" x 4"

Bradley Corporation • 215-1480 Rev. E; EN 06-915

2/8/07

11

Image 11
Contents System MG-Series With TouchTime Control Table of ContentsPre-Installation Information 749 445 MG-2/TT Express Lavatory System DimensionsTAS Juvenile Height DimensionsRough in supplies and optional hot water heater Installation InstructionsStandard Height Mounting Juvenile Height MountingBradley Corporation 215-1480 Rev. E EN Rough in wall anchors and electrical outlet Front View Mount frame to wallDo not overtighten Install bowl assemblySingle Tempered Supply Connecting supplyHot Cold Supplies Screws AS Shown Connecting optional hot water heaterConnecting electrical and supply tubing Terreon Bowl, Sprayhead and Pedestal End Cap cleaning Cleaning and Maintenance InstructionsTerreon and panel maintenance Stainless Steel Access Panel cleaningAssembly of Components To access solenoids Sensor assembly and solenoid valve accessTouchTime and Aerator/Access Plate Assemblies Other replacement partsTroubleshooting Solenoid Valve VAC Solenoid Valve S07-067 closed body and S07-067A thru body Problem External leaks in the system Thermostatic Mixing Valve Maintenance and TroubleshootingProblem Limited water flow Repair Kit S65-259 Vernatherm Thermostatic Mixing Valve S01-524

MG-2/TT specifications

The Bradley Smoker MG-2/TT is an innovative and highly regarded appliance in the world of smoking and outdoor cooking. This model is designed to cater to both novice and experienced enthusiasts who are looking for a reliable and consistent way to smoke their favorite meats, fish, and vegetables.

One of the standout features of the MG-2/TT is its dual heating system. This system includes both a smoker and a heating element, allowing for precise temperature control throughout the smoking process. The digital thermostat enables users to set and maintain the desired temperature, ensuring that food is cooked evenly and to perfection. This feature is especially beneficial for longer smoking sessions, where maintaining a consistent temperature is crucial for flavor and texture.

Another key characteristic of the Bradley Smoker MG-2/TT is its patented wood bisquette system. This innovative technology utilizes compressed wood bisquettes that are fed into the smoker automatically. The bisquettes ignite and smolder, producing clean and flavorful smoke without the bitterness that can come from traditional methods. The ability to choose from a variety of wood types, such as hickory, mesquite, or apple, provides users with the flexibility to customize their smoking experience and achieve different flavor profiles.

The construction of the MG-2/TT emphasizes durability and insulation. Built with high-quality materials, the smoker is designed to withstand the elements and provide excellent heat retention. Its insulated walls minimize temperature fluctuations, further enhancing the smoking process. This durability ensures that users can enjoy their Bradley Smoker for many seasons to come.

Additionally, the MG-2/TT is designed for ease of use. The user-friendly digital interface offers simple navigation for temperature adjustments and time settings, making it accessible for users of all skill levels. The spacious interior allows for ample cooking space, accommodating different food items simultaneously.

Cleaning and maintenance are also made easier with the Bradley Smoker MG-2/TT, which features a removable drip tray and easy-access smoke generator. This thoughtful design helps keep the smoker clean and ready for the next culinary adventure.

In summary, the Bradley Smoker MG-2/TT combines advanced technology, durable construction, and user-friendly features to create an exceptional smoking experience. Whether you're smoking ribs, salmon, or vegetables, this versatile appliance ensures flavorful results every time. The Bradley Smoker MG-2/TT stands out as a top choice for smoking aficionados and outdoor cooking lovers alike.