Bradley Smoker MG-2/TT installation instructions Install bowl assembly, Do not overtighten

Page 9

 

Express® Lavatory System - MG-Series with TouchTime® Control

Installation Instructions

MG-2/TT

 

 

Installation Instructions continued . . .

Step 4: Install bowl assembly

IMPORTANT: See Figure 4 below when installing the bowl assembly. If the fixture has soap option, refer to the soap installation manual 215-1585 before installing the bowl assembly.

1.With someone to assist you, place the bowl assembly squarely onto the frame being careful not to pinch tubing between bowl and frame.

2.Attach the front of the bowl assembly to the frame using the two 1/4-20 x 1/2" pan-head screws and washers provided. Do not tighten screws at this time.

IMPORTANT: When bolting the bowl assembly to the wall, do not overtighten the bolts. Overtightening bolts can damage the Terreon® material.

3.After the bowl assembly is attached to the frame, install the two 3/8" bolts and washers (supplied by the installer) to bolt the bowl to the wall anchors. Do not overtighten bolts.

4.Tighten the screws installed in procedure #2 above to secure the bowl assembly to the frame.

Do not overtighten.

5.If necessary, adjust sprayhead body to fit closely to wall by adjusting sprayhead mounting bolts. See Figure 8 on page 14 for sprayhead mounting bolt locations.

 

 

 

 

 

 

 

 

 

 

3/8" BOLT

 

 

FRAME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AND WASHER

 

 

 

 

 

 

 

 

 

3/8" BOLT

 

 

SPRAYHEAD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AND WASHER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TERREON®

END CAP (R)

Figure 4

1/4"-20 x 1/2"

PAN HEAD SCREWS AND WASHERS

(2) PLACES

BACK VIEW

BOWL

TERREON® END CAP (L)

Bradley Corporation • 215-1480 Rev. E; EN 06-915

2/8/07

9

Image 9
Contents System MG-Series With TouchTime Control Table of ContentsPre-Installation Information 749 445 MG-2/TT Express Lavatory System DimensionsTAS Juvenile Height DimensionsStandard Height Mounting Installation InstructionsJuvenile Height Mounting Rough in supplies and optional hot water heaterBradley Corporation 215-1480 Rev. E EN Rough in wall anchors and electrical outlet Front View Mount frame to wallDo not overtighten Install bowl assemblyConnecting supply Hot Cold SuppliesSingle Tempered Supply Screws AS Shown Connecting optional hot water heaterConnecting electrical and supply tubing Terreon and panel maintenance Cleaning and Maintenance InstructionsStainless Steel Access Panel cleaning Terreon Bowl, Sprayhead and Pedestal End Cap cleaningAssembly of Components To access solenoids Sensor assembly and solenoid valve accessTouchTime and Aerator/Access Plate Assemblies Other replacement partsTroubleshooting Solenoid Valve VAC Solenoid Valve S07-067 closed body and S07-067A thru body Thermostatic Mixing Valve Maintenance and Troubleshooting Problem Limited water flowProblem External leaks in the system Repair Kit S65-259 Vernatherm Thermostatic Mixing Valve S01-524

MG-2/TT specifications

The Bradley Smoker MG-2/TT is an innovative and highly regarded appliance in the world of smoking and outdoor cooking. This model is designed to cater to both novice and experienced enthusiasts who are looking for a reliable and consistent way to smoke their favorite meats, fish, and vegetables.

One of the standout features of the MG-2/TT is its dual heating system. This system includes both a smoker and a heating element, allowing for precise temperature control throughout the smoking process. The digital thermostat enables users to set and maintain the desired temperature, ensuring that food is cooked evenly and to perfection. This feature is especially beneficial for longer smoking sessions, where maintaining a consistent temperature is crucial for flavor and texture.

Another key characteristic of the Bradley Smoker MG-2/TT is its patented wood bisquette system. This innovative technology utilizes compressed wood bisquettes that are fed into the smoker automatically. The bisquettes ignite and smolder, producing clean and flavorful smoke without the bitterness that can come from traditional methods. The ability to choose from a variety of wood types, such as hickory, mesquite, or apple, provides users with the flexibility to customize their smoking experience and achieve different flavor profiles.

The construction of the MG-2/TT emphasizes durability and insulation. Built with high-quality materials, the smoker is designed to withstand the elements and provide excellent heat retention. Its insulated walls minimize temperature fluctuations, further enhancing the smoking process. This durability ensures that users can enjoy their Bradley Smoker for many seasons to come.

Additionally, the MG-2/TT is designed for ease of use. The user-friendly digital interface offers simple navigation for temperature adjustments and time settings, making it accessible for users of all skill levels. The spacious interior allows for ample cooking space, accommodating different food items simultaneously.

Cleaning and maintenance are also made easier with the Bradley Smoker MG-2/TT, which features a removable drip tray and easy-access smoke generator. This thoughtful design helps keep the smoker clean and ready for the next culinary adventure.

In summary, the Bradley Smoker MG-2/TT combines advanced technology, durable construction, and user-friendly features to create an exceptional smoking experience. Whether you're smoking ribs, salmon, or vegetables, this versatile appliance ensures flavorful results every time. The Bradley Smoker MG-2/TT stands out as a top choice for smoking aficionados and outdoor cooking lovers alike.