Mitsubishi Electronics TC-24A installation manual

Page 39

5.Use the ④ buttons shown in the pop-up window at right to set the range for each operation mode (Cooling, Heating, and AUTO).

To clear the lower limit, keep hitting the button until

appears. To clear the upper limit, keep hitting the button until

appears.

Not all functions are supported by all local remote controllers. The buttons for the unsupported functions will be grayed out.

6. Touch the ⑤ OK button to save the settings.

④

⑤

•The temperature setting range and the operation mode that can be set depend on the indoor unit and remote controller models.

•Operation from the local remote controllers that are connected to Mr. SLIM® cannot be prohibited from the TC-24A. Use the button lock function on the controllers instead.

•If the temperature limits are set too high or low, the system changeover function may not work properly and the units may not operate in the expected mode (Cooling or Heating).

When using the system changeover function, it is recommended not to use the temperature range limit function.

39

Image 39

Contents TC-24A General precautions Safety PrecautionsPrecautions for moving or repairing the controller Function Description Function ListScreen Function List contd Screen Names and Functions of Controller Components Touch panel / Buttons Zoom-out screen To the Grid Zoom-in screen How to switch the Home screenHow to move to the Main Menu screen How to move to the Maintenance screenTo the Group To the LISTscreen screen List screenButtons Home screen Operation mode⑪Group button ⑬Set temperature button⑰Set temperature button Setback mode ①GRID screen buttonIcon Displays Home screen General equipment icon Interlocked ventilation LossnayFan speed Louver Group No Mode ErrorSet temperature Error Filter signGeneral equipment group Fan speed displayGeneral equipment icon Lossnay groupBasic Operations Screen selectionGrid zoom-out screen Grid zoom-in screen List screen Group selection During receiving the external input signalBasic operations Group screen Basic Operations contdON/OFF operation Operating the Air conditioning unit groupTouch Setback modeWhile the setback operation is performed Louver useable only while the unit is in operation After setting a through D , touch the OK buttonFan speed useable only while the unit is in operation Air direction useable only while the unit is in operationOperating the General equipment group Hold Function SettingFan speed setting ModeLock Buttons Multiple group selection screen① Home button Menu Screen Button SettingsTime and Schedule Main Menu Time and Schedule Usage Main Menu SettingsSetting the date, time, and display format Time and Schedule screenSetting the operation schedule Schedule setting flowchartSet Schedule screens Time and Schedule screen contd Schedule Setting ProceduresButton to access the Edit Pattern screen Copying, pasting, deleting, and inserting settings Deleting selected settings Copying and pasting the existing settingsIcon Definitions Inserting an eventMain Menu Time and Schedule Check Current Settings Checking the Weekly/One Day Schedule Settings Restrictions Settings ① Enable/Disable Lock button Save Lockable functions and the corresponding buttons To logTo lock or unlock buttons To temporarily unlock all itemsRestrictions Settings contd EditGroup Page ① Show Group Name List button Select All buttonLocked → Unlocked To select the temperature unit Control PanelTo select the display language To set the backlight timeout time To show or hide the room temperatureTo change the group name Control Panel contdTo enter a character string Character input screenTo select the groups on which to execute SET Back function Controller button settingsOperation mode 2 default To select the groups on which to execute the Hold functionShow Group Name List button Adjusting the volume and brightness To adjust the volumeTo adjust the brightness Main Menu Control Panel Touch Panel Calibration Calibrating the touch panelSystem Management Checking or resetting the Error or Filter SignTo check the error To reset the errorTo reset the Filter Sign after cleaning the filter System Management contd Using the System-Changeover functionOperation mode Maintenance Touch Panel Cleaning screenTo clean the touch panel Solution TroubleshootingWT05827X01