Function List (cont'd)
Function | Description | |
|
|
|
| Lock Buttons | Locks the following functions: ON/OFF, Mode (including |
| SETBACK), Set Temperature, Fan Speed, and HOLD. | |
|
| |
| Set Temperature Range | Limits the available temperature range for the local remote |
Restrictions Settings | Limit | controllers (each group or all groups). |
| Prohibit Remote | Locks the following buttons on the local remote controllers: |
| ON/OFF, Mode, Set Temperature, and Filter Reset buttons | |
| Controller | |
| (collectively or by group) | |
|
| |
|
| Selects the display formats for the following items: Display |
| Display Format | language, temperature unit, room temperature, display or |
| ||
|
| |
|
| and backlight timer, and group names. |
|
| • Selects the groups that the operation applies to when the |
|
| Collective ON/OFF, HOLD, or SETBACK button on the |
| Button Setting | controller is pressed. All groups are selected by default. The |
|
| maximum and minimum temperatures can be set for the |
|
| SETBACK operation. |
|
| When the Group icon is touched, the action differs depending |
Basic Settings |
| on the operation mode. Default is set to the operation mode 2. |
|
| Operation mode1: Turns ON/OFF the units in the group |
|
| whose Group icon is touched. |
|
| Operation mode2: Displays the check mark when Group icon |
| HOME screen | is touched.Touch the Group icons of the |
| groups to be operated, and then touch the | |
| Operation Mode Setting | |
| "OPERATE" button to move to the Group | |
|
| |
|
| screen. Multiple groups can be selected. |
|
| Use this mode when operating the multiple |
|
| groups collectively. |
|
| Operation mode3: Directly moves to the Group screen of the |
|
| group whose Group icon is touched. |
| Volume Control | Sets the sound volume and screen brightness. |
|
| If an error occurs on the |
|
| controllers it controls, the LED on the Collective ON/OFF button |
| Error | will blink. If an error occurs on the indoor or LOSSNAY units, |
| will appear on the corresponding group icon on the HOME | |
|
| |
|
| screen. The error code can be verified and reset on the Status |
Maintenance |
| List screen. |
|
| Filter Icon will appear on the HOME screen when the filter is |
| Filter sign | due for cleaning. The icon can be removed from the Status List |
|
| screen. |
| Touch Panel Cleaning Mode | Disables the touch panel to allow the user to clean the panel. |
| Touch Panel Calibration | Calibrates the touch panel if the touch panel does not respond |
| Mode | correctly when touched. |
|
| Receives input signals from external devices and start/stop all |
| External input | groups of units or permit/prohibit operations from the local |
Miscellaneous |
| remote controllers. Requires cable connections. |
| Outputs the operation status of the units (ON/OFF) or error | |
|
| |
| External output | signals to external devices collectively, using contact signals. |
|
| Requires cable connections. |