Mitsubishi Electronics TC-24A To select the groups on which to execute the Hold function

To select the groups on which to execute the HOLD function

1. Touch the ② Hold Button Setting button on the [Button Setting]
	screen.
2.	Read the pop-up message, and touch the OK button to confirm.
3.	Select the groups to include from the Group buttons labeled ⑨ .			⑨
	By default, all groups are selected.
4. Touch the ⑩ Save button.
		Select All	button
		Selects all groups.

Show Group Name List button

Shows a list of group names in a pop-up window.

⑩

To select the groups on which to execute the Collective ON/OFF function

1.Touch the ③ Collective Operation Setting button on the [Button Setting] screen.

2.Read the pop-up message, and touch the OK button to confirm.

3. Select the groups to include from the Group buttons labeled ⑪ .			⑪
By default, all groups are selected.
4. Touch the ⑫ Save button.
	Select All	button
	Selects all groups.

Show Group Name List button

Shows a list of group names in a pop-up window.

⑫

・The DIDO controller groups that do not support the Collective ON/OFF function cannot be selected.

To assign an operation mode to the Group icon on the [HOME] screen.

	Operation mode 1
⑬
	Stops or starts the operation of the specific group of
	units when the Group icon is touched.

Operation mode 2 (default)

Allows the user to select multiple groups before jumping to the Group screen. Touch the operate button after

⑭selecting groups to jump to the Group screen.

Operation mode 3

Jumps to the Group screen when a Group icon is touched.

1.Touch the ④ Group Icon Setting button on the [Button Setting] screen.

2.Select among Operation mode 1, Operation mode 2, and Operation mode 3 by touching the corresponding button labeled ⑬ .

3.Touch the ⑭ Save button.

47