FEATURES
High Sensible Cooling Capacity
The sensible cooling capacity has been significantly improved through optimized heat exchanger design.
Comfort Heating
The PRH series are designed to provide effective heating even when the outside temperature is down to 0˚C. The
Highly Efficient Operation
The EER (Energy Efficiency Ratio) on these models is greatly improved by revised design specifications and by being manufactured stringently to Mitsubishi Electric high quality standards.
Flexibility of Supply Air Delivery
All series feature belt driven Supply Air fans enabling accurate matching of actual airflow rates to the specified quantities. Accurate commissioning is assisted by the capability to exchange pulleys and belts if necessary to achieve the desired air balance.
Labor Saving Installation
Because of the single unit configuration, all refrigeration work can be omitted. The unit operation can commence immediately after connection to the power supply, drain piping, ducting and control system.
Low Ambient Cooling
In applications with relatively high internal loads, there may be a requirement for all series to operate on cooling at low ambient conditions. An optional accessory is available to maintain the refrigeration circuit in balance at outdoor temperatures as low as 0˚C (PRH only).In case of
Wide Electrical Control Capability
All series may be ordered in either of two control configurations.
The factory standard is for provision of a 24 volt terminal block to enable a field wired control of the contractors choice to be connected.
Alternatively, for models
These options give the flexibility to enable connection to Building Management Systems, smoke spill cycles, economy cycles, remote monitoring etc.
Please consult your local Mitsubishi Electric Sales office for application advice on these controls.
- 5 -