5 . Initial setting
5 - 1 Shifting to initial setting menu
•Shift to the initial setting menu by continuously pressing + (2seconds or longer) on the user operation menu screen.(Refer to section
Shift to the user operation menu by continuously pressing + (2seconds or longer) on the initial setting screen (Refer to section
•When group information is not saved, the following initial setting screen is displayed when power is turned on at this
controller. | MENU | WED 15:29 |
|
1 ADDRESS SETTING
2 FUNCTION SELECT
3 IP ADDRESS SETTING
4 GROUP SETTING
|
|
|
|
|
| PLEASE SET | |
|
|
|
|
|
| INITIAL SETTING | |
5 - 2 |
|
|
| ||||
|
|
| |||||
(1) | Select 6 |
|
| "6.ADDRESS SETTING"(or 1 | "1.ADDRESS SETTING). | ||
(2) | Set the controller address by pressing the 0 | to 9 INS. switches.(000,201 250). | |||||
(3) When the | SCREEN switch is pressed after setting, the screen returns. | ||||||
|
| BACK |
|
|
| ||
|
|
|
|
|
|
|
|
MENU | WED 15:29 |
6ADDRESS SETTING
7FUNCTION SETTING
8IP ADDRESS SETTING
BACK
Press the 6 switch to select"6ADDRESS
SETTING"
BACK
Press the SCREEN
switch to back to the initial setting menu.
M-NET ADDRESS
•When the controller is shipped from the factory, the address is set to "000". (Always set the address to "000" When the K transmission converter is managed.)
NOTE : Observe the following precautions when this controller manages the
Refer to the K transmission converter instruction manual for further details.
•Address of this controller
Always set the address of this controller to "000" .
•Function select setting of this controller
Always set the No.3 function setting to ON.
•Indoor unit address
Set all the
Indoor unit address
001
*The K transmission converter