Lantronix EDS-MD8, EDS-MD16 Certificate Upload Settings, To Configure an Existing SSL Credential

10: Security Settings

Using XML

Not applicable.

Certificate Upload Settings

SSL certificates identify the EDS-MD4/8/16 to peers. Certificate and key pairs can be uploaded to the EDS-MD4/8/16 through either the CLI or XML import mechanisms. Certificates can be identified on the EDS-MD4/8/16 by a name provided at upload time.

	Table 10-6 Upload Certificate Settings
Upload	Description
Certificate
Settings
New Certificate	SSL certificate to be uploaded.
	RSA or DSA certificates are allowed.
	The format of the certificate must be PEM. It must start with “-----BEGIN
	CERTIFICATE-----“ and end with “-----END CERTIFICATE-----“. Some
	Certificate Authorities add comments before and/or after these lines. Those need to be
	deleted before upload.
New Private Key	The key needs to belong to the certificate entered above.
	The format of the file must be PEM. It must start with “-----BEGIN RSA
	PRIVATE KEY-----” and end with “-----END RSA PRIVATE KEY-----”.
	Read DSA instead of RSA in case of a DSA key. Some Certificate Authorities add
	comments before and/or after these lines. Those need to be deleted before upload.

To Configure an Existing SSL Credential

Using Web Manager

To configure an existing SSL Credential, click SSL in the menu and select Credentials.

Using the CLI

To enter the SSL command level: enable -> ssl

To enter the Credential command level: enable -> ssl -> credentials

Using XML

Include in your file:

<configgroup name=”ssl”>

and <configitem name=”credentials” instance=”name”>

and <value name="RSA certificate"/> or <value name="DSA certificate"/>

EDS-MD User Guide 63