Lantronix EDS-MD16, EDS-MD8 IP Network Stack Settings, To Transfer or Modify Filesystem Files

11: Maintenance and Diagnostics Settings

To Transfer or Modify Filesystem Files

Using Web Manager

To create a new file or directory, upload an existing file, copy or move a file, click Filesystem in the menu and select Browse.

Using the CLI

To enter the Filesystem command level: enable -> filesystem

Using XML

Not applicable.

IP Network Stack Settings

There are various low level network stack specific items that are available for configuration. This includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.

	Table 11-4IP Network Stack Settings
Protocol Stack	Description
IP Settings
IP Time to Live	This value typically fills the Time To Live in the IP header. SNMP refers to this
	value as "ipDefaultTTL".
	Enter the number of hops to be transmitted before the packet is discarded.
Multicast Time to Live	This value fills the Time To Live in any multicast IP header. Normally this value
	will be one so the packet will be blocked at the first router. It is the number of
	hops allowed before a Multicast packet is discarded.
	Enter the value to be greater than one to intentionally propagate multicast
	packets to additional routers.

To Configure IP Network Stack Settings

Using Web Manager

To configure IP protocol settings, click Protocol Stack in the menu and select IP.

Using the CLI

To enter the command level: enable -> config -> ip

Using XML

 Include in your file: <configgroup name=”ip”>

EDS-MD User Guide 67