7: Network Settings

Network Link Settings

Physical link parameters can be configured for an Ethernet (eth0) Network Interface (see Table 7-2).

Table 7-2 Network 1 (eth0) Link Settings

Network 1 Ethernet (eth0)

Description

Link Settings

 

Speed

Select the Ethernet link speed. (Default is Auto)

 

Auto = Auto-negotiation of Link Speed

 

10 = Force 10 Mbps

 

100 = Force 100 Mbps

 

 

Duplex

Select t he Ethernet link duplex mode. (Default is Auto)

 

Auto = Auto-negotiation of Link Duplex

 

Half = Force Half Duplex

 

Full = Force Full Duplex

 

 

Notes:

When speed is Auto, duplex must be Auto or Half.

When speed is not Auto, duplex must be Half or Full.

Fixed speed Full duplex will produce errors connected to Auto, due to duplex mismatch.

To Configure Network Link Settings

Using Web Manager

To modify Ethernet (eth0) Link information, click Network on the menu and select Network 1 -> Link.

Using the CLI

To enter the eth0 Link command level: enable -> config -> if 1 -> link

Using XML

Include in your file: <configgroup name="ethernet" instance="eth0">

EDS-MD User Guide

48

Page 48
Image 48
Lantronix EDS-MD8, EDS-MD16, EDS-MD4 manual To Configure Network Link Settings, Network 1 eth0 Link Settings