12: Advanced Settings

Using the CLI

To enter Email command level: enable -> email 1

Using XML

Include in your file: <configgroup name=”email” instance=”1”>

Command Line Interface Settings

The Command Line Interface settings allow you to control how users connect to and interact with the EDS-MD4/8/16's command line. It is possible to configure access via the Telnet and SSH protocols, in addition to general CLI options.

Basic CLI Settings

The basic CLI settings control general CLI access and usability options.

 

Table 12-2 CLI Configuration Settings

 

 

Command Line Interface

Description

Configuration Settings

 

Login Password

Enter the password for logins by the admin account. The default password is

 

“PASS”.

 

 

Enable Level Password

Enter the password for access to the Command Mode Enable level. There is

 

no password by default.

 

 

Quit Connect Line

Set the string used to terminate a connect line session and resume the CLI.

 

Type <control> before any key to be pressed while holding down the Ctrl key,

 

for example, <control>L.

 

 

Inactivity Timeout

Set a time period in which the CLI session should disconnect if no data is

 

received. Enter 0 to disable. Blank the display field to restore the default.

 

 

Line Authentication

Enable or Disable authentication for CLI access on the serial lines.

 

 

To View and Configure Basic CLI Settings

Using Web Manager

To view CLI statistics, click CLI in the menu and select Statistics.

To configure basic CLI settings, click CLI in the menu and select Configuration.

Using the CLI

To enter CLI command level: enable -> config -> cli

Using XML

Include in your file: <configgroup name=”cli”>

EDS-MD User Guide

76

Page 76
Image 76
Lantronix EDS-MD16, EDS-MD8, EDS-MD4 manual Command Line Interface Settings, To View and Configure Basic CLI Settings