Lantronix EDS-MD8, EDS-MD16 To Configure Host Settings, SSH Username, Remote Address, Remote Port

	8: Terminal and Host Settings
Host Settings (continued)	Description
SSH Username	Enter a username to select a pre-configured Username/Password/
	Key (configured on the SSH: Client Users), or leave it blank to be
	prompted for a username and password at connect time.
	Note: This field appears if you selected SSH as the protocol.
Remote Address	Enter an IP address for the host to which the device will connect.
Remote Port	Enter the port on the host to which the device will connect.

To Configure Host Settings

Note: The following section describes the steps to view and configure Host 1 settings; these steps apply to other host instances of the device.

Using Web Manager

To configure a particular Host, click Host on the menu and select Host 1 -> Configuration.

Using the CLI

To enter the Host command level: enable -> config -> host 1

Using XML

 Include in your file: <configgroup name=”host” instance=”1”>

EDS-MD User Guide 51