1: Using This Guide

Equipment Classifications

Classification according to the type of protection against electric shock: Class I Equipment

Classification according to the degree of protection against electric shock: No Applied Parts

Classification according to the degree of protection against ingress of water: IP20

Classification according to the mode of operation: Continuous Operation

Environmental Conditions for Transportation and Storage

An ambient temperature range of -30°C to +80°C

A relative humidity range of 0% to 95%, noncondensing

An atmospheric pressure range of 50 kPa to 106 kPa

Cleaning Instructions

1.Disconnect all cables and unplug ac power from the device.

2.Prepare a disinfectant solution using 1 part bleach mixed with 9 parts water.

3.Lightly moisten a tissue with the mild detergent and wipe down only the outside of the device.

4.Allow the device to air-dry or wipe dry with a clean dry tissue before use.

Caution: To avoid electric shock and for the device to work properly, do not allow cleaning solution get inside the device, specifically the interface port connectors or the ac inlet. Do not immerse the device in any liquid.

Electromagnetic Interference

This equipment has been tested and found to comply with the EMC limits for the Medical Device Directive 93/42/EEC (EN 55022 Class A and EN 60601-1-2). These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving device

Increase the separation between the equipment

Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected

Consult the manufacturer or field service technician for help

EDS-MD User Guide

18

Page 18
Image 18
Lantronix EDS-MD8, EDS-MD16, EDS-MD4 Equipment Classifications, Environmental Conditions for Transportation and Storage