La Crosse Technology WS-7058U instruction manual Time Zone Setting, VI. Date Setting

4.Press the SET button to confirm, and advance to set the minutes.

5.The minute digit will flash in LCD 1. Press the + button to advance the minutes (holding the + button down will advance the minutes in increments of five).

6.Press the SET button to confirm, and to advance to the Time Zone setting.

V.TIME ZONE SETTING

This is a feature available on the WS-7058U, it is designed for use in Germany. You may ignore this feature.

1.Press the SET button five times to enter this setting mode.

2.“ 0” will flash in LCD 1.

3.Press the SET button again to advance to set the date.

VI. DATE SETTING

1.Press the SET button six times to enter the Date Setting mode.

2.The default year “98” will flash in LCD 1.

3.Press the + button to change the year.

Note: The date is displayed in the Day/Month/Year format.

4.Press the SET button to confirm the year, and to advance to set the month. The default month digit “1” will flash in LCD 1.

5.Press the + button to change the month.

6.Press the SET button to confirm, and to advance to set the date. The default date digit “1” will flash in LCD 1.

7.Press the + button to change the date.

8.Press the SET button to confirm, and to advance set the Date Display.

VII. SELECTING °F OR °C AND INCHES OR MILLIMETERS

1.Press the SET button nine times to enter the °F/°C setting mode.

2.The default “°C” will flash in LCD 1.

3.Press the + button to toggle between “F” and “°C.”

Note: When °F is selected, the rainfall measurement will change to inches. When °C is selected, the rainfall measurement will change to millimeters. When the selection is made the effects are seen immediately in temperature and rainfall measurement readings found in other LCD screens.

7