La Crosse Technology WS-7058U instruction manual Weather Center, LCD Screen

C.WEATHER CENTER

1.Remove the battery cover. To do this, place a solid object in the space provided at the lower- central position of the battery cover (the cover has white writing on it) then push up and pull out on the battery cover.

2.Observe the correct polarity, and install three AA batteries.

3.Replace the battery cover.

THE LCD SCREEN

Hanging Hole

Battery Cover

Removable Table Stand

Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) Screen will completely light up for a brief moment.

Note: After the LCD Screen briefly lights up, “375” will appear at the top of the LCD, then the LCD will display the default settings. There is also a satellite icon that appears between the Outdoor temperature and humidity—this icon informs the user that the Weather Center is receiving signals from the sensors. Within 12 minutes the Outdoor temperature and humidity should be displayed—if not, remove batteries from all units and repeat battery installation.

Following is a general display description of the LCD layout. Details concerning the LCD Screen will be

explained during the complete Programming sections and the Features

& Operations sections.

LCD 1—shows the time.

LCD 2—indoor temperature/humidity. LCD 3—forecast icons and air pressure. LCD 4—rainfall/air pressure histories,

and rain quantity.

LCD 5—air pressure and rain quantity LCD 6—outdoor temperature/humidity.

LCD 1

LCD 2

LCD 3

LCD 4

LCD 5

LCD 6

5