La Crosse Technology WS-7058U Detailed SET-UP Guide Battery Installation, Rainfall Sensor

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring free.

A.REMOTE THERMO-HYGRO SENSOR

Mounting

Bracket/Receptor

Rain Cover

Battery Cover

		Thermo-Hygro
		Sensor
1.	Pull the cylindrical rain cover off the sensor.
2.	Remove the battery cover (located on the backside of the sensor,
	above the mounting post and bracket). Press the arrow and slide
	the battery cover off.
3.	Observing the correct polarity install 2 AA batteries.
4.	Replace battery cover, and place rain cover snugly onto the sensor.
B. RAINFALL SENSOR
1.	Remove the flat-head screw and battery cover, located on the
	underside of the base.		Battery
2.	Observe the correct
			Compartment
	polarity, and install two AA
	batteries.

3.Make sure the rubber weather seal is in place and replace the battery cover and screw.

4