![](/images/new-backgrounds/1042594/4259427x1.webp)
14 | Installing the hood |
|
Mounting the duct cover
•Position the duct cover over the mounted hood.
•Slide the bottom of the duct onto the glass area.
•Position the top of the duct over the duct mounting bracket. If a telescopic duct cover is used, grab the upper part of the telescopic duct cover, pull it and place it in the duct cover mounting bracket.
•Secure the top of the duct with 2 assembly screws provided.
•Secure the bottom of the duct with 2 assembly screws provided.
Install the grease filter and turn power on at service panel. Check operation of the hood.
IMPORTANT: If the hood doesn’t switch ON, before calling for service, check if the internal General ON/ OFF
General ON/OFF
Push button Switch
Frontside of the hood
Back side of the hood