Dolby Laboratories 950 7.1 Connecting Audio Components, CD Player, Audio Recorder, DVD Player

Page 19

Connecting Audio Components

CD Player

Analog Connect the L and R channel outputs on the CD player to the CD IN jacks on the Model 950.

Digital If your CD player has a digital output jack, connect it to one of the coaxial (COAX 1 or 2) or optical (OPT 1-4) input jacks on the preamp/processor, depending on the type of connector used by the CD player. Later, you will con- figure the Model 950 to use the specific input that you have chosen. For now, note which digital input you connected to on your system chart.

Audio Recorder

A recording device such as a cassette deck, MD recorder, DAT deck or CD recorder can be connected to the Model 950 using either or both of the fol- lowing methods.

Analog Connect the L and R audio outputs on the recorder (usually marked PLAY) to the TAPE IN jacks on the rear of the preamp/processor and connect the L and R audio inputs (usually marked REC) to the TAPE OUT jacks of the Model 950.

Digital If your recorder has a digital output jack, connect it to one of the coaxial (COAX 1 or 2) or optical (OPT 1-4) input jacks on the preamp/processor, depending on the type of connector used by the device. Later, you will configure the Model 950 to use the specific input that you have chosen. For now, note which digital input you connected to on your system chart.

If your recorder has a digital input jack, connect it to either the coaxial or opti- cal output jack on the preamp/processor. The signal from the selected digital input source of the Model 950 will be sent to the recorder.

Connecting Video Components

Before making connections to any video devices, it will help to understand how the Model 950 routes the video portion of the signal through its video section.

Any signal that appears at one of the composite video input jacks (DVD, VIDEO 1, 2 or 3) is automatically sent to the composite video OUT and VCR OUT jacks, as well as the S-Video OUT and VCR OUT jacks.

Any signal that appears at the S-Video input jacks (DVD, VIDEO 1, 2 or

3)is automatically sent to the S-Video OUT and VCR OUT jacks, as well as the composite video OUT and VCR OUT jacks.

Any signal that appears at the component video (DVD or VIDEO 1) input jacks is automatically sent to the component video MONITOR OUT con- nection only.

NOTE: To provide the greatest signal flexibility, be sure to connect all available types of inputs and outputs from your video devices. For example, if only the composite video output (yellow RCA jack) con- nection is made to your display device, component sources will not be available, even if they are connected to the Model 950.

Owner’s Manual

Connecting Your Model 950

DVD Player

Composite Connect the composite video output from the DVD player to the DVD video input jack on the rear of the Model 950 using an RCA-type video cable.

S-VideoIf there is an S-Video output on the DVD player, and you have an S- Video input on your TV or monitor, connect it to the S-Video DVD input on the rear of the Model 950 using an S-Video cable. S-Video delivers a better picture than composite connections and should be used whenever possible unless you can use component connections, which deliver better video than S-Video.

Component If the DVD player has component video outputs, connect them to the DVD component video input jacks on the rear of the Model 950 using an appropriate cable set.

Analog Audio Connect the L and R channel outputs on the DVD player to the DVD IN audio jacks on the rear of the Model 950.

Digital Audio Connect one of the digital output jacks on the DVD player to one of the coaxial (COAX 1 or 2) or optical (OPT 1-4) input jacks on the rear of the preamp/processor, depending on the type of connector used by the DVD player. Later, you will configure the Model 950 to use the specific input that you have chosen. For now, note which digital input you connected to on your system chart.

Multi-channel Audio If your DVD player supplies a multi-channel audio output (for DVD Audio or SACD playback), connect the six outputs (special cable sets for this are available from numerous sources, including Outlaw Audio) from your player to the six input jacks labeled MULTI CHANNEL INPUT on the rear panel of the Model 950. Be sure match the connections—left to left, right surround to right surround, and so on. If your player includes a built-in Dolby Digital decoder and has 5.1 channel analog audio outputs we suggest that you do not use them, but use the digital audio connection and the Model 950’s internal decoders instead.

If you are connecting a DVD-Audio or SACD player to the Model 950 using these jacks, you will need to consider the setting for the Analog Bass Management switch on the Model 950’s rear panel. If your system uses all full range speak- ers, set the switch in the OFF position. In that setting the signal will be routed directly from the input jacks to the volume control.

However, if your system uses small, frequency-restricted satellite speakers, the switch should be set to the ON position. In that setting the signals sent to the main speakers will be cut at 80 Hz and a summed bass signal will be sent to the subwoofer output. Note that you should place this switch in the OFF posi- tion if your playback source includes internal bass management circuitry or if you use an external bass manager such as Outlaw’s ICBM-1 between the player and the Model 950.

Model 950 7.1 Channel Preamp/Processor

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model Please Read First Where they exit from the unitInstallation Location Power CordHandle the AC Power Cord Gently WiringTable of Contents For use with digital recorders or distribution systems Model 950 FeaturesProvide maximum performance for critical music listening Unpacking AccessoriesModel 950 Front Panel Press these buttons to select an input source Model 950 Rear Panel Front Panel and On Screen Display OSD Source Selection buttons see Remote ControlReturns the Model 950 to standby mode when the unit is on Status LED Indicator seeIlluminates the Remote Control buttons for 7 seconds Sets the 950’s built-in sleep function timerDolby Digital Surround Format InformationDolby Digital Surround EX Dolby Pro Logic Additional Information Connecting Your ModelCirrus Extra Surround StereoAudio Recording Device DVD Player Connecting an External Amplifier to the Model Stereo Amplifier Connection Record Chart Audio Recorder Connecting Audio ComponentsConnecting Video Components CD PlayerFM Antenna Video RecorderVideo Display Satellite Tuner or TelevisionAM Antenna Power Control ConnectionsRemote Control Power ConnectionMain Menu appears on the Front Panel Display and the OSD System SetupNavigating the Setup Menus Standby Indicator on the Front Panel will light upYou can scroll in either direction using the and buttons Input Setup and Selection100% Speaker ConfigurationSpeaker Placement 75%Speaker Placement Surr Rear LB/RB Subwoofer Front Speaker Config FrontTo configure the Model 950 for your speaker system  For Subwoofer you can select on or OFFLeft Channel CalibrationThis will produce a display that shows Unit cycles through the speakers in the following sequenceSetting The Speaker Distance Delays System ConfigurationDolby Pro Logic II Plii Music Parameter Source choices appear as follows as you scroll through them Multi-zoneSelecting a Source PowerVolume Control OperationSurround Data Format Lock Muting the VolumeChanging the Surround Mode Bypass SettingTuner Operation Unit cycles through the options in the following sequence Night ModeRecording a Source Channel TrimFront Panel Display and the OSD will show the following Theater CompensationMultichannel Source Playback Analog Bass ManagementFollowing times appear as you scroll through them Setting the Front Panel Display BrightnessSetting the On Screen Display OSD Time Out Sleep TimerMulti-zone Operation Red LED and the selected Source button will illuminate Remote Control Setup and OperationBattery Installation Setup Using Preprogrammed CodesSet-Up Code Numbers To program using Auto SearchLED and Source button will blink twice and then go out Press the T/V buttonBacklighting Volume Control Punch ThroughOperation Source Selection ButtonsLearning a New Command Learning Commands from Another RemoteExample of Programming a Macro Sequence Cable Setup CodesVCR DVD When You Are Away Care and MaintenanceTroubleshooting CleaningSymptom Possible Cause Solution Options System ResetModel 950 Specifications Page T l a w a u d i o I n c Outlaw Audio Limited Warranty

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents