Dolby Laboratories 950 7.1 owner manual System Reset, Symptom Possible Cause Solution Options

Page 45

Owner’s Manual

Troubleshooting

System Reset

In rare cases the Model 950’s internal processor may freeze or lock-up caus- ing abnormal operation. This is common to all micro-processor controlled devices when the unit is subject to excessive static discharge, AC line noise, or power spikes.

In most cases it is easy to solve this problem by simply unplugging the Model 950 from its AC power source for about five minutes. After waiting, reconnect the power cord and turn the unit on. If the unit functions normally, no further action is needed.

In the event that the unit still does not operate properly, it may be necessary to manually reset the processor. Note, however, that when the processor is reset you will lose all settings including digital audio assignments, surround mode settings, speaker configurations, tuner presets and any other memory items. For this reason we strongly recommend that you record these settings on the

chart provided on page 18 of this manual so that it is easy to restore them after resetting the processor.

To reset the unit you must first remove the volume control knob on the front panel by grasping it and gently pulling the knob straight out towards you. When the knob is removed you will see a very small hole in the black aluminum front panel at the “nine o’clock” position. With the unit on, use a toothpick or unfolded paper clip to gently press the button behind the opening. Hold the button for a second and then release it. This should reset the system.

Replace the volume control knob, being careful to line up the flat surface on the control shaft with the matching flat surface on the inside of the knob. Push the knob straight on to the shaft until it is firmly seated.

If the manual reset does not solve the problem, contact Outlaw Audio for further advice.

Symptom

Possible Cause

Solution Options

 

 

 

Unit does not turn on when remote or

No AC Power

front panel buttons are pressed

 

Make certain AC power cord is plugged into a live outlet Make certain rear panel power switch is ON

No sound from digital audio source

Input not properly selected

Make certain the correct digital input is associated to the source

 

 

 

No DTS when a DVD is playing

Incorrect bitstream output from DVD player

Check the DVD player’s setup menus to make certain DTS output is selected

 

 

Check the disc menu to make certain DTS is selected

 

 

 

No sound from rear surround speakers

Incorrect speaker configuration

Check Speaker Config menu to make certain that “BS(LB)” or “LB/RB” is selected for Surr Rear

 

 

 

Intermittent buzzing in tuner

Interference from local sources

Move or relocate the antenna

 

 

Move the antenna or unit away from computers, fluorescent or neon lights, or appliances

 

 

with motors

Unit does not respond to remote commands

Low remote battery power

Change the batteries

Remote set to different device

Press the AUD button to make sure the remote is outputting 950 codes

Remote sensor is obscured

Make certain the front-panel remote sensor is visible or connect a remote sensor

No sound from one or more channels

Poor connections

Check interconnects to the amplifier and connections from the amplifier to the speakers

 

Incorrect surround mode

Check surround mode to make certain it provides output to all speakers

 

Incorrect speaker configuration

Check Speaker Config menu to make certain all speakers are set to Small or Large

 

 

 

Model 950 7.1 Channel Preamp/Processor

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Model Please Read First Where they exit from the unitHandle the AC Power Cord Gently Power CordWiring Installation LocationTable of Contents Model 950 Features For use with digital recorders or distribution systemsProvide maximum performance for critical music listening Accessories UnpackingModel 950 Front Panel Press these buttons to select an input source Model 950 Rear Panel Front Panel and On Screen Display OSD Returns the Model 950 to standby mode when the unit is on Remote ControlStatus LED Indicator see Source Selection buttons seeIlluminates the Remote Control buttons for 7 seconds Sets the 950’s built-in sleep function timerSurround Format Information Dolby DigitalDolby Digital Surround EX Dolby Pro Logic Cirrus Extra Surround Connecting Your ModelStereo Additional InformationAudio Recording Device DVD Player Connecting an External Amplifier to the Model Stereo Amplifier Connection Record Chart Connecting Video Components Connecting Audio ComponentsCD Player Audio RecorderVideo Display Video RecorderSatellite Tuner or Television FM AntennaRemote Control Power Control ConnectionsPower Connection AM AntennaNavigating the Setup Menus System SetupStandby Indicator on the Front Panel will light up Main Menu appears on the Front Panel Display and the OSDYou can scroll in either direction using the and buttons Input Setup and SelectionSpeaker Placement Speaker Configuration75% 100%Speaker Placement To configure the Model 950 for your speaker system Speaker Config Front For Subwoofer you can select on or OFF Surr Rear LB/RB Subwoofer FrontThis will produce a display that shows Channel CalibrationUnit cycles through the speakers in the following sequence LeftSystem Configuration Setting The Speaker Distance DelaysDolby Pro Logic II Plii Music Parameter Source choices appear as follows as you scroll through them Multi-zoneVolume Control PowerOperation Selecting a SourceChanging the Surround Mode Muting the VolumeBypass Setting Surround Data Format LockTuner Operation Recording a Source Night ModeChannel Trim Unit cycles through the options in the following sequenceMultichannel Source Playback Theater CompensationAnalog Bass Management Front Panel Display and the OSD will show the followingSetting the On Screen Display OSD Time Out Setting the Front Panel Display BrightnessSleep Timer Following times appear as you scroll through themMulti-zone Operation Battery Installation Remote Control Setup and OperationSetup Using Preprogrammed Codes Red LED and the selected Source button will illuminateLED and Source button will blink twice and then go out To program using Auto SearchPress the T/V button Set-Up Code NumbersOperation Volume Control Punch ThroughSource Selection Buttons BacklightingLearning Commands from Another Remote Learning a New CommandExample of Programming a Macro Sequence Cable Setup CodesVCR DVD Troubleshooting Care and MaintenanceCleaning When You Are AwaySymptom Possible Cause Solution Options System ResetModel 950 Specifications Page T l a w a u d i o I n c Outlaw Audio Limited Warranty

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents