Dolby Laboratories 950 7.1 Theater Compensation, Multichannel Source Playback, Theater Compenon

Page 34

Owner’s Manual

Operation

To adjust channel trim using the TRIM function:

1.Press the TRIM button on the front panel or the remote control.

The Front Panel Display and the OSD will show the following:

CHANNEL TRIM

LEFT FRONT : 0dB

2.Use the < and > buttons to adjust the channel trim level.

You can adjust the selected channel level in 1dB steps across a range of -15dB to +10dB.

3.When you are finished adjusting the Channel Trim for the selected speaker, press TRIM again to cycle to the next channel.

The unit cycles through the speakers in the following sequence:

LEFT FRONTCENTER FRONTRIGHT FRONTRIGHT SURR(OUND)RIGHT BACK (SURROUND)LEFT BACK (SURROUND)LEFT SURR(OUND)SUBWOOFER

If necessary, repeat steps 2 and 3 until you have adjusted the channel trim of all the speakers in your system.

4.Press the TRIM button on the front panel or the remote control again to exit the Channel Trim function.

Remember to return any channel(s) that you have trimmed back to the original setting when you are done watching the particular program. If you find you are continually trimming the same channel(s) by the same amount for every film, you might want to consider re-calibrating the speaker levels as shown in the section, “Channel Calibration” on page 27. Set the levels for the channel(s) up or down by the amount you normally trim them.

Theater Compensation

Theater Compensation provides special equalization within any of the selected DSP modes. Most theatrical soundtracks are mixed on large dubbing stages for playback in large movie theaters. When these soundtracks are played back in your home, they may appear to have too much treble, sounding harsh and “bright.” Theater Compensation modifies the audio signal to reduce these char- acteristics and make the soundtrack reproduction more natural sounding.

Theater Compensation can be accessed from the Main Menu or the T.COMP button on the remote.

To turn on Theater Compensation from the Main Menu:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press the button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration menu and SYSTEM CONFIG appears on the Front Panel Display.

3.Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display and the OSD (see figure 4 on page 28). The selected menu item should

be FRONT DISTANCE.

4.Press the button until the Theater Compensation menu is selected.

5.Use the < and > buttons to choose between On and Off.

6.After making your selection, press the button twice to exit the Main Menu.

To turn on Theater Compensation using the T.COMP button:

1.Press the T.COMP button on the remote control.

The Front Panel Display and the OSD will show the following:

DVD

DOLBY D

THEATER COMPEN:ON

2.Press the T.COMP button again to toggle the between On and Off.

The Theater Compensation menu will disappear automatically approxi- mately 15 seconds after you make your selection.

Dolby Pro Logic II Cinema and DTS-ES NEO:6 Cinema include a form of equalization of their own to address the same conditions. When using these modes the addition of Theater Compensation may cause excessive reduction of the upper frequencies. However, you may wish to experiment with different soundtracks to find what sounds best to you.

IMPORTANT NOTE: Theater Compensation is not recommended for Music modes, as the equalization added is not normally needed.

Multichannel Source Playback

Access to a 5.1 channel source connected to the Multichannel Inputs is accom- plished by using the 6 Channel Direct mode. Examples of a 5.1 channel source would be a DVD-A or SACD multi-channel player.

Analog Bass Management

The Model 950 provides Analog Bass Management when 6 Channel Direct is selected. This function, which only applies to a source connected to the Multi- channel inputs, is controlled via a small toggle switch on the rear panel of the Model 950 (see item 18 on page 9).

When the switch is in the Up position, the Analog Bass Management function is On, and the unit will provide an 80Hz crossover for the Left, Center, Right, Left Surround and Right Surround loudspeakers. Bass below 80Hz from all these channels will be sent into the subwoofer (.1) channel.

If the switch is set in the Down position, no crossover filtering occurs, provid- ing the full bandwidth signal, including all bass information, to the speakers. However, all information below 80Hz is still summed and sent to the subwoofer output.

Note: Since in the Off position bass information is not removed from the speakers outputs, it is recommended that, unless you are absolutely sure your loudspeakers can handle the low frequency information, or that this function is supplied within your DVD player, you leave this switch in the Up/On position.

Once you have connected a component to the Multichannel inputs and set the Analog Bass Management, you should never have to change it, unless you get different speakers or a player that includes its own bass management.

34

Outlaw Audio

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Model Where they exit from the unit Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents For use with digital recorders or distribution systems Model 950 FeaturesProvide maximum performance for critical music listening Unpacking AccessoriesModel 950 Front Panel Press these buttons to select an input source Model 950 Rear Panel Front Panel and On Screen Display OSD Status LED Indicator see Remote ControlReturns the Model 950 to standby mode when the unit is on Source Selection buttons seeSets the 950’s built-in sleep function timer Illuminates the Remote Control buttons for 7 secondsDolby Digital Surround Format InformationDolby Digital Surround EX Dolby Pro Logic Stereo Connecting Your ModelCirrus Extra Surround Additional InformationAudio Recording Device DVD Player Connecting an External Amplifier to the Model Stereo Amplifier Connection Record Chart CD Player Connecting Audio ComponentsConnecting Video Components Audio RecorderSatellite Tuner or Television Video RecorderVideo Display FM AntennaPower Connection Power Control ConnectionsRemote Control AM AntennaStandby Indicator on the Front Panel will light up System SetupNavigating the Setup Menus Main Menu appears on the Front Panel Display and the OSDInput Setup and Selection You can scroll in either direction using the and buttons75% Speaker ConfigurationSpeaker Placement 100%Speaker Placement  For Subwoofer you can select on or OFF Speaker Config FrontTo configure the Model 950 for your speaker system Surr Rear LB/RB Subwoofer FrontUnit cycles through the speakers in the following sequence Channel CalibrationThis will produce a display that shows LeftSetting The Speaker Distance Delays System ConfigurationDolby Pro Logic II Plii Music Parameter Multi-zone Source choices appear as follows as you scroll through themOperation PowerVolume Control Selecting a SourceBypass Setting Muting the VolumeChanging the Surround Mode Surround Data Format LockTuner Operation Channel Trim Night ModeRecording a Source Unit cycles through the options in the following sequenceAnalog Bass Management Theater CompensationMultichannel Source Playback Front Panel Display and the OSD will show the followingSleep Timer Setting the Front Panel Display BrightnessSetting the On Screen Display OSD Time Out Following times appear as you scroll through themMulti-zone Operation Setup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation Red LED and the selected Source button will illuminatePress the T/V button To program using Auto SearchLED and Source button will blink twice and then go out Set-Up Code NumbersSource Selection Buttons Volume Control Punch ThroughOperation BacklightingLearning a New Command Learning Commands from Another RemoteExample of Programming a Macro Sequence Setup Codes CableVCR DVD Cleaning Care and MaintenanceTroubleshooting When You Are AwaySystem Reset Symptom Possible Cause Solution OptionsModel 950 Specifications Page Outlaw Audio Limited Warranty T l a w a u d i o I n c

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents