Dolby Laboratories 950 7.1 Muting the Volume, Changing the Surround Mode, Bypass Setting

Page 31

Muting the Volume

Use this control to turn the sound off momentarily, such as when interrupted by a phone call.

To mute the main volume:

1.Press the MUTE button on the remote control or the front panel.

The sound will be muted and the On/Standby/Mute indicator will blink continuously. The word MUTE replaces the volume level on the Front Panel Display and OSD.

DVD

DOLBY EX

OPTICAL1

MUTE

 

 

Note that the volume level in the second zone is not affected.

2.Press either MUTE button again to restore the volume to its previous level.

The On/Standby/Mute indicator will go out.

Changing the Surround Mode

Use these controls to change the surround mode from the default selected during Input Configuration.

1.Press one of the Surround mode buttons (2, DTS, CR SURR or STEREO) on the remote or the < and > SURR MODE buttons on the front panel.

When the 950 acquires a digital bitstream, the Front Panel Display and OSD will show what type it is (PCM, S/PDIF) and the number of channels (2/2, 2/0, 3/2.1, etc.) contained in the signal. An example is shown below:

DVD S/PDIF

INPUT TYPE: 3/2.1

2.Press the button again to cycle through the available surround modes.

Only those modes that can be used with the currently selected source will be available as you cycle through the choices. Your selection will appear above the volume level on the Front Panel Display and OSD

DVD DTS-ES

OPTICAL1 00dB

Use the information on page 12-13 to learn more about the available surround mode options.

Owner’s Manual

Operation

Surround Data Format Lock

The Model 950 will automatically set the surround format based on the signal it receives from the selected source. To avoid the slight delay occasionally encountered in the Auto Select process, you can choose to override the Auto Data Format detection circuitry by following the procedure below.

To lock a specific surround mode:

1.Press the desired Surround Mode button (2, DTS, CR SURR or STEREO) on the remote control repeatedly to cycle through the available processing options.

Your selection will appear on the Front Panel Display and OSD.

DVD

DOLBY D

OPTICAL1

00dB

 

 

2.Press the same button for five (5) seconds to choose from among three data format options for digital audio sources.

The following is shown on the Front Panel Display and the OSD:

DVD

DOLBY D

DATA FORMAT : AUTO

Auto is the Default setting for this option, and means that when the unit detects the special code imbedded within certain data streams such as Dolby Digital or DTS it will set itself to properly decode that type of incoming signal.

3.Use the < or > buttons to select one of the Data Format options.

You can select either Dolby D(igital), DTS, or PCM (for Pro Logic II), as the default format. If you do this, signals that are not in the selected format won’t be recognized. Therefore, we recommend that you leave the system in Auto Mode unless you wish to use the selected mode exclusively.

The Data Format menu will disappear automatically approximately 10 seconds after you make your selection.

Bypass Setting

When playing an analog input source you may bypass the Model 950’s digital processing system and listen to the source in “pure” two-channel stereo.

To change the 950 to Stereo bypass mode:

1.Press the BYPASS button on the remote or the STEREO BYPASS button on the front panel

The source signal will be passed through without any digital processing. If the currently selected source input is digital (Coaxial or Optical), the 950 will automatically change to the analog input for that source and the show the information on the Front Panel Display and OSD. An example is shown below:

DVD BYPASS

ANALOG 00dB

2.Press the button again to return the signal path to the digital system.

Model 950 7.1 Channel Preamp/Processor

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model Please Read First Where they exit from the unitInstallation Location Power CordHandle the AC Power Cord Gently WiringTable of Contents For use with digital recorders or distribution systems Model 950 FeaturesProvide maximum performance for critical music listening Unpacking AccessoriesModel 950 Front Panel Press these buttons to select an input source Model 950 Rear Panel Front Panel and On Screen Display OSD Source Selection buttons see Remote ControlReturns the Model 950 to standby mode when the unit is on Status LED Indicator seeIlluminates the Remote Control buttons for 7 seconds Sets the 950’s built-in sleep function timerDolby Digital Surround Format InformationDolby Digital Surround EX Dolby Pro Logic Additional Information Connecting Your ModelCirrus Extra Surround StereoAudio Recording Device DVD Player Connecting an External Amplifier to the Model Stereo Amplifier Connection Record Chart Audio Recorder Connecting Audio ComponentsConnecting Video Components CD PlayerFM Antenna Video RecorderVideo Display Satellite Tuner or TelevisionAM Antenna Power Control ConnectionsRemote Control Power ConnectionMain Menu appears on the Front Panel Display and the OSD System SetupNavigating the Setup Menus Standby Indicator on the Front Panel will light upYou can scroll in either direction using the and buttons Input Setup and Selection100% Speaker ConfigurationSpeaker Placement 75%Speaker Placement Surr Rear LB/RB Subwoofer Front Speaker Config FrontTo configure the Model 950 for your speaker system  For Subwoofer you can select on or OFFLeft Channel CalibrationThis will produce a display that shows Unit cycles through the speakers in the following sequenceSetting The Speaker Distance Delays System ConfigurationDolby Pro Logic II Plii Music Parameter Source choices appear as follows as you scroll through them Multi-zoneSelecting a Source PowerVolume Control OperationSurround Data Format Lock Muting the VolumeChanging the Surround Mode Bypass SettingTuner Operation Unit cycles through the options in the following sequence Night ModeRecording a Source Channel TrimFront Panel Display and the OSD will show the following Theater CompensationMultichannel Source Playback Analog Bass ManagementFollowing times appear as you scroll through them Setting the Front Panel Display BrightnessSetting the On Screen Display OSD Time Out Sleep TimerMulti-zone Operation Red LED and the selected Source button will illuminate Remote Control Setup and OperationBattery Installation Setup Using Preprogrammed CodesSet-Up Code Numbers To program using Auto SearchLED and Source button will blink twice and then go out Press the T/V buttonBacklighting Volume Control Punch ThroughOperation Source Selection ButtonsLearning a New Command Learning Commands from Another RemoteExample of Programming a Macro Sequence Cable Setup CodesVCR DVD When You Are Away Care and MaintenanceTroubleshooting CleaningSymptom Possible Cause Solution Options System ResetModel 950 Specifications Page T l a w a u d i o I n c Outlaw Audio Limited Warranty

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents