Dolby Laboratories 950 7.1  For Subwoofer you can select on or OFF, Speaker Config Front

Page 26

Owner’s Manual

System Setup

The first step in configuring the 950 to operate with your speaker system is to set the type, number and crossover frequencies of your particular loudspeakers. You make these selections using the Speaker Configuration menu shown below.

Figure 2

SPEAKER CONFIG

> FRONT

 

:SMALL

CENTER

 

:SMALL

SURR

 

:SMALL

SURR REAR

:LB/RB

SUBWOOFER

:ON

FRONT

XOVER :100Hz

CENTER

XOVER :100Hz

SURR

XOVER :100Hz

RETURN

TO MAIN MENU

To configure the Model 950 for your speaker system:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press the button once to select the Speaker Configuration menu.

The cursor on the OSD should be pointing to the Speaker Configuration menu and SPEAKER CONFIG appears on the Front Panel Display.

3.Press SELECT to enter the Speaker Configuration menu.

The Speaker Configuration menu appears on the Front Panel Display and the OSD (see figure 2). The selected menu item should be FRONT.

The first three settings in the Speaker configuration menu deal with the type of speakers you are using in your system. It is very important that you understand what is meant by the LARGE and SMALL settings in this menu. They do not refer to the physical size of the speakers, but to their ability to handle very powerful deep bass. Most loudspeaker systems on the market should be classified as Small, since they do not have the capability to handle the often extraordinary amount of deep bass content film soundtracks can contain.

It is strongly recommended that you consult your loudspeaker instruc- tion manual regarding the capabilities of your particular system with regard to low bass/low frequency reproduction.

Please note that all THX certified loudspeaker systems are classified under this method as SMALL since a subwoofer is required for any THX certified loudspeaker system.

In any case you should consider using a subwoofer for any system which you expect to effectively handle the low frequency dynamics of modern motion picture soundtrack sources such as DVD or HDTV feeds, and many other discrete multi-channel programming sources.

If you aren’t sure about your speaker’s real world capabilities and you are using a subwoofer, choose Small, since this will insure that all the appropriate low frequency information is directed to the subwoofer where it can be most effectively handled.

4.Use the < and > buttons to cycle through the speaker options for the FRONT speaker.

The following options are available for each group of loudspeakers:

For FRONT you can select SMALL or LARGE

For CENTER you can select SMALL, LARGE or NONE

For SURR(OUNDS) you can select SMALL, LARGE or NONE

For SURR(OUNDS) REAR you can select BS(LB), LB/RB or NONE

LB/RB means you have a Left Back and Right Back rear surround speaker setup for use in a 7.1 configuration. BS(LB) means you have a single centrally placed BACK Surround speaker for use in a 6.1 (EX) type configuration.

For SUBWOOFER you can select ON or OFF

5.Press the button when you have made a selection.

Repeat steps 4 and 5 until you have completed selecting the speaker type for each loudspeaker in your system.

6.Press the button when you are finished to select the Front Crossover (XOVER) menu.

The Front, Center and Surround Crossover menus are used to indepen- dently set the internal High Pass filter of the Model 950’s Cirrus Triple Crossover for each of these three speaker groups.

7.Use the < and > buttons to adjust the Front Crossover.

The crossover settings appear as follows as you scroll through them:

40Hz60Hz80Hz100Hz120Hz150Hz

You can scroll in either direction using the < and > buttons .

Consult the material that came with your loudspeakers to determine the correct settings, if any are recommended. The THX standard is 80Hz. In general, if you are not sure about the frequency response of your speakers, we recommend you set the crossover at 80Hz, unless otherwise directed by the manufacturer. If you are using very small satellite speakers you may need to set the crossovers to 100 or even 120Hz. When correctly set, you should hear a smooth transition of lower to upper bass between the satellites and the subwoofer.

8.Press the button when you have made a selection.

Repeat steps 7 and 8 until you have completed the speaker crossover settings for each group of speakers.

9.Press the button to select the Return to Main Menu option.

10.Press the SELECT or MENU button to return to the Main Menu, or press the MENU button twice to exit the menu system.

26

Outlaw Audio

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model Where they exit from the unit Please Read FirstWiring Power CordHandle the AC Power Cord Gently Installation LocationTable of Contents Provide maximum performance for critical music listening Model 950 FeaturesFor use with digital recorders or distribution systems Model 950 Front Panel AccessoriesUnpacking Press these buttons to select an input source Model 950 Rear Panel Front Panel and On Screen Display OSD Status LED Indicator see Remote ControlReturns the Model 950 to standby mode when the unit is on Source Selection buttons seeSets the 950’s built-in sleep function timer Illuminates the Remote Control buttons for 7 secondsDolby Digital Surround EX Dolby Pro Logic Surround Format InformationDolby Digital Stereo Connecting Your ModelCirrus Extra Surround Additional InformationAudio Recording Device DVD Player Connecting an External Amplifier to the Model Stereo Amplifier Connection Record Chart CD Player Connecting Audio ComponentsConnecting Video Components Audio RecorderSatellite Tuner or Television Video RecorderVideo Display FM AntennaPower Connection Power Control ConnectionsRemote Control AM AntennaStandby Indicator on the Front Panel will light up System SetupNavigating the Setup Menus Main Menu appears on the Front Panel Display and the OSDInput Setup and Selection You can scroll in either direction using the and buttons75% Speaker ConfigurationSpeaker Placement 100%Speaker Placement  For Subwoofer you can select on or OFF Speaker Config FrontTo configure the Model 950 for your speaker system Surr Rear LB/RB Subwoofer FrontUnit cycles through the speakers in the following sequence Channel CalibrationThis will produce a display that shows LeftDolby Pro Logic II Plii Music Parameter System ConfigurationSetting The Speaker Distance Delays Multi-zone Source choices appear as follows as you scroll through themOperation PowerVolume Control Selecting a SourceBypass Setting Muting the VolumeChanging the Surround Mode Surround Data Format LockTuner Operation Channel Trim Night ModeRecording a Source Unit cycles through the options in the following sequenceAnalog Bass Management Theater CompensationMultichannel Source Playback Front Panel Display and the OSD will show the followingSleep Timer Setting the Front Panel Display BrightnessSetting the On Screen Display OSD Time Out Following times appear as you scroll through themMulti-zone Operation Setup Using Preprogrammed Codes Remote Control Setup and OperationBattery Installation Red LED and the selected Source button will illuminatePress the T/V button To program using Auto SearchLED and Source button will blink twice and then go out Set-Up Code NumbersSource Selection Buttons Volume Control Punch ThroughOperation BacklightingExample of Programming a Macro Sequence Learning Commands from Another RemoteLearning a New Command Setup Codes CableVCR DVD Cleaning Care and MaintenanceTroubleshooting When You Are AwaySystem Reset Symptom Possible Cause Solution OptionsModel 950 Specifications Page Outlaw Audio Limited Warranty T l a w a u d i o I n c

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents