Electrolux QB 5201 user manual Adjusting the dosage of rinse aid

Page 10

10Use of rinse aid

1. Open the container by pressing the release button (A).

2.Add the rinse aid in the container. The maximum level for filling is indicated by "max".

The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting.

3. Ensure that the lid is closed after every re- fill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dosage of rinse aid

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Image 10
Contents Dishwasher Contents Child safety Safety informationGeneral safety Safety informationInstallation Product descriptionControl panel A1 2002 + A2Extra Silent button Setting modeDigital display Function buttonsSetting the water softener First useSetting electronically Setting manuallyExamples To fill Use of dishwasher saltUse of rinse aid Salt for the first timeAdjusting the dosage of rinse aid Daily use Daily useLoading cutlery and dishes Open the door and slide out the baskets to load the dishesCutlery basket Lower basketLoading cutlery and dishes Place the grid insert on the cutlery basket Upper basketKet Adjusting the height of the upper basket Fill with detergent Use of detergentRaising / lowering the upper basket Multitab function Detergent tabletsActivation/deactivation of the Multitab function Adjust the rinse aid dosageWashing programmes Activation/deactivation of the rinse aid dispenserWashing programmes Energy kWh Water litresCancelling a delay start or a washing programme in progress Setting and starting the programme with delay startSelect and start a washing programme Unloading the dishwasher Care and cleaningCleaning the filters Interrupt a washing programme in progressCare and cleaning Cleaning the spray armsNever try to remove the spray arms What to do if… Appears in the digital display Installation Technical dataTechnical data Building-in Installation Adjusting the height of the plinth Water outlet hose connection Water connectionWater supply connections Locknut must be correctly fitted to avoid water leaksElectrical connection Drain hose spigotEnvironment concerns Packaging materialPage Page 117956650-122008