8Setting the water softener
| Water hardness |
| Adjusting the water hardness | Use of salt | ||
|
|
|
| setting |
| |
|
|
|
|
|
|
|
°dH | °TH | mmol/l | manually |
| electronically |
|
29 - 36 | 51 - 64 | 5,1 - 6,4 | 2 |
| level 7 | yes |
23 - 28 | 40 - 50 | 4,0 - 5,0 | 2 |
| level 6 | yes |
19 - 22 | 33 - 39 | 3,3 - 3,9 | 2 |
| level 5 | yes |
15 - 18 | 26 - 32 | 2,6 - 3,2 | 1 |
| level 4 | yes |
11 - 14 | 19 - 25 | 1,9 - 2,5 | 1 |
| level 3 | yes |
|
|
|
|
|
|
|
4 - 10 | 7 - 18 | 0,7 - 1,8 | 1 |
| level 2 | yes |
|
|
|
|
|
|
|
< 4 | < 7 | < 0,7 | 1 |
| level 1 | no |
|
|
|
|
|
|
|
Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish- washer.
3. Turn the water hardness dial to position 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously and keep pressed buttons B and C , until the lights of buttons A , B and C start flashing.
3.Press button A , the lights of buttons B and C turn off while the light of button A goes on flashing. In the digital display is visible the current level.
Examples:
displayed = level 5
displayed = level 10
4.To change the level, press button A . Each time the button is pressed the level changes (for the selection of the new level see the chart).
Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.