Agilent Technologies E6701A manual Set the Device’s Primary Port, Set Data Bearer to Gprs

Models: E6701A

1 32
Download 32 pages 55.11 Kb
Page 16
Image 16

e.Use the number keys to enter the PC IP address (see PC Setup above for your PC IP Address). This tells the phone where to find its primary server.

i.Use the left arrow (*) and right arrow (#) keys to move among the numbers; use the C key to clear (or delete) a number.

Note: on the Motorola Timeportphone, you must insert leading zeros so the IP address consists of 12 numbers. The decimal points between the numbers are entered automatically by the phone for this specific function.

Example:

 

If your PC IP Address =

111.222.33.4

Enter this in the phone=

111.222.033.004

Write the IP Address you entered in the phone here:

PC IP Address: _________________________________

Set the Device’s Primary Port

Not all devices have this port. This is based on the example of the Motorola Timeport phone. Set this as needed for your device.

1.On the WAP Settings menu, scroll to 2>Primary Port:

2.Press the OK key to Edit

3.Under Enter Port:, edit the number to 9201

This is the default value, and should already be in the data field.

4.Press the OK key when finished

Set Data Bearer to GPRS

This is based on the example of the Motorola Timeport phone. Set this as needed for your device.

1.Press the C key to return to the profile1 menu.

2.On the profile1 menu, scroll to 2>Data Bearer

3.Press the OK key to Edit

4.Scroll to 1>GPRS

This is the default value, and should already be in the data field.

5.Press the OK key to Edit

It is OK if the APN, Username, and Password are all blank.

6.Press the C key 3 times to return to the Browser Menu. Use the scroll key to move to the top of this menu.

Set WAPlite Gateway Address in Your Device

A WAP Gateway is used to observe WAP pages using the test set’s Data Channel feature. If you are using the Infinite WAPlite Gateway software (Installation instructions are in Appendix A), follow these steps. If not, go to the next section.

Set the phone’s browser to find the WAPLite homepage on your PC

1.Scroll to 2>Web Favourites

2.Press the OK key

 Copyright 2002 Agilent Technologies.

10001810-E6701A Tutorial LAN Connection

All Rights Reserved.

Page 16 of 32

Rev. 1.2; Feb. 14, 2002

Page 16
Image 16
Agilent Technologies E6701A manual Set the Device’s Primary Port, On the WAP Settings menu, scroll to 2Primary Port