Agilent Technologies E6701A manual Table of Contents

Table of Contents
Table of Contents			2
About This Tutorial			4
Introduction			4
Equipment Required for this Tutorial			5
Test Set			5
Wireless Device			5
Personal Computer (PC)			5
WAP Gateway software (for data connection evaluations)			5
Cables			5
Setup			7
Hardware Connections			7
Figure 1. PC Connected Directly to Test Set via LAN Crossover Cable			7
Test Set Setup			8
Set the Date and Time (Optional)			9
Set the RF In/Out Amplitude			9
Set the Cell Parameters			9
PC Setup			10
Windows 98			10
Windows 2000			12
Verify PC Settings			14
Verify that Your Device Will Perform an Attach			15
Set Up Your Wireless Device			15
Set WAPlite Gateway Address in Your Device			16
E6701A Features Using a Direct Connection Between the PC and Test Set			18
Product Feature: Screen Image Capture			18
Product Feature: Protocol Logging			18
View the log data on the PC			19
Save the Log to the PC			19
View the saved log			20
Log Data Using the Test Set’s Front Panel			20
Product Feature: Ping			21
Product Feature: Data Channel			23
To run the Infinite WAPlite Proxy Gateway software on your PC:			23
To access a simple local file on the WAPLite gateway with the phone:			24
To browse “real” websites via the WAPLite gateway with the phone:			24
To log the IP datagrams while you browse the WAPLite gateway with the phone:			25
Product Feature: Additional Connection Parameters			26
 Copyright 2002 Agilent Technologies.	10001810-E6701A Tutorial LAN Connection
All Rights Reserved.	Page 2 of 32	Rev. 1.2; Feb. 14, 2002