Electrolux FAVORIT 50730 manual Disposal, Economical and Ecological Dishwashing

Page 7

Operating Instructions

In the event of a fault, first close the tap, then switch off the appli- ance and unplug it from the mains. If the appliance is permanently wired to the mains: remove the fuse.

2Disposal

Disposing of the Packaging Material

Dispose of the dishwasher packaging material correctly. All the packag- ing materials used are harmless to the environment and can be recy- cled.

• Plastic parts are marked with standard international abbreviations:

– >PE<

for polyethylene, e.g. sheet wrapping material

– >PS<

for polystyrene, e.g. padding material (always CFC-free)

– >POM<

for polyoxymethylene, e.g. plastic clips

Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.

Disposal of Old Appliances

When disposing of old appliances, remove the plug and ensure that any locks or catches are removed to prevent young children becoming trapped inside.

Use an authorised disposal site.

2Economical and Ecological Dishwashing

Ensure that the water softener is correctly adjusted.

Do not pre-rinse dishes under running water.

When you wash a small load, the load sensor calculates the amount of water necessary and shortens the programme. It is more economi- cal to always wash with a full load.

Select the wash programme to suit the nature and degree of the soil- ing on the dishes.

Do not use more detergent, special salt or rinse aid than is recom- mended in these operating instructions and by the detergent manu- facturer.

7

Image 7
Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Control panel Which fault has occurred on the dishwasherNing Panel Prior to using for the first timeAdjust the water softener Your areaIng the appropriate button Dishwasher must be switched offManual setting Electronic settingTurning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower RackRinse aid To switch off the control indicator for rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher Loading Cutlery To ease the loading of large items Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower rack Over to the leftTwo rear plate inserts in the lower Folded across one anotherAcross one another To ease the loading of large itemsLoading Cups, Glasses and Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentSoiling Selecting the Wash Programme Programme TableOpen the door carefully Start the wash programmeInterrupting or ending the wash programme WasherPause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timerEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Load Sensing Sensor LogicCleaning the Filter What to do, if Fault warnings are displayedDishes are wet and dull There are problems operating the dishwasherWash results are unsatisfactory Dishes are still dirtyDecrease rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangementsFree-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemOff Changing a fuse Electrical ConnectionConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG