Electrolux FAVORIT 50730 There are problems operating the dishwasher, Dishes are still dirty

Page 31

Operating Instructions

...there are problems operating the dishwasher.

Symptom

Possible Cause

Solution

 

The dishwasher door has not

Shut the door.

 

been closed properly.

 

 

 

Mains plug is not

Insert mains plug.

The programme does

plugged in.

 

 

 

not start.

House fuse is faulty.

Replace fuse.

 

 

For dishwasher models with

If dishes are to be washed

 

delay start timer:

immediately cancel delay

 

Delay start has been selected.

start timer.

 

 

 

 

The washing compartment is

Only wash cutlery and dishes

 

made of anticorrosive stain-

that are suitable for dish-

 

less steel. Rust spots in the

washer use.

 

washing compartment are

 

Spots of rust are visible

from particles from outside

 

in the washing com-

the appliance (rust particles

 

partment.

from the water pipe, from

Close the salt dispenser lid

 

pans, cutlery, etc.). Remove

 

securely.

 

such spots with a commer-

 

 

 

cially available stainless steel

 

 

cleaner.

 

There is a whistling

The whistling is not a cause

Use a different brand of

noise during washing.

for concern.

detergent.

 

 

 

...the wash results are unsatisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were arranged in such a way as to stop the water reaching all parts of the surface. The dish racks must not be overloaded.

–The filters in the base of the washing compartment are dirty or incor- rectly positioned.

–Too little or no detergent was used.

–Where there are limescale deposits on the dishes: the special salt con- tainer is empty or the water softener is incorrectly adjusted.

–The drain hose is connected wrongly.

The dishes are wet and dull.

–Rinse aid was not used.

–The rinse aid container is empty.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Control panel Which fault has occurred on the dishwasherNing Panel Prior to using for the first timeAdjust the water softener Your areaIng the appropriate button Dishwasher must be switched offManual setting Electronic settingTurning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower RackRinse aid To switch off the control indicator for rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher Loading Cutlery To ease the loading of large items Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower rack Over to the leftTwo rear plate inserts in the lower Folded across one anotherAcross one another To ease the loading of large itemsLoading Cups, Glasses and Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentSoiling Selecting the Wash Programme Programme TableOpen the door carefully Start the wash programmeInterrupting or ending the wash programme WasherPause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timerEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Load Sensing Sensor LogicCleaning the Filter What to do, if Fault warnings are displayedDishes are wet and dull There are problems operating the dishwasherWash results are unsatisfactory Dishes are still dirtyDecrease rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangementsFree-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemOff Changing a fuse Electrical ConnectionConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents