electrolux 5
Indicator lights
Comes on when a washing programme has ended.
1)The salt and rinse aid indicator lights never come on while a washing programme is running even if filling with salt and/or rinse aid is necessary.
The digital display
The digital display indicates:
•the level of hardness to which the water softener is set,
•the number corresponding to the washing programme,
•the approximate remaining time of the run- ning programme,
•activation/deactivation of the rinse aid dis- penser ( ONLY with 'Multitab' function ac- tive).
•the end of a washing programme (the dig- ital display shows a zero),
•the countdown for the delay start,
•fault codes concerning malfunction of the appliance,
•activation/deactivation of the audible sig- nals.
Delay start button
You can delay the start of the programme for between 1 and 19 hours.
Refer to 'Select and start a washing pro- gramme' chapter for the set of this function.
Programme selection buttons
Press one of these buttons until the display shows the number of the desired pro- gramme. Refer to 'Washing programmes' chart for details.
Save energy button
This function decreases the temperature in the drying phase. Energy saving is between 10% and 25%.
Dishes can be wet at the end of the pro- gramme. In this condition we recom- mend, to open the dishwasher door and keep it ajar and let dishes dry naturally.
This function can be set with all washing pro- grammes. The related indicator light comes on when you press the button.
The save energy function has no effect on some programmes. Refer to 'Washing pro- grammes' for the list of programmes where save energy has or not effect.
Multitab button
Set this function when you use combi deter- gent tablets (3 in 1, 4 in 1, 5 in 1, etc.). Refer to 'Multitab function' chapter.
Cancel button
With this button you can cancel a washing programme or a delay start in progress.
Function buttons (A, B and C)
The following functions can be set using these buttons:
•setting the water softener level,
•activation/deactivation of the rinse aid dis- penser when Multitab function is active,
•activation/deactivation of the audible sig- nals.
Setting mode
Press the on/off button. If the lights of the programme selection buttons come on and the digital display shows 2 horizontal bars, the appliance is in setting mode.
Always remember that when performing the following operations:
–selecting a washing programme,
–setting the water softener level,
–activating/deactivating the rinse aid,
–activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the on/off button. If the lights of the programme selection buttons come on and the digital display shows the time duration (in minutes) of a programme, this means that the last performed or selected programme is still set. In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a pro- gramme in progress
•Press and hold the cancel button until the digital display shows 2 horizontal bars. The programme has been cancelled and the appliance is now in setting mode.