1.Press the On/Off button. The dishwasher must be in setting mode.
2.Simultaneously press and hold function buttons B and C , until the lights of func- tion buttons A , B and C start flashing.
3.Press function button A , the lights of function buttons B and C go off while the light of function button A continues to flash. The current level shows on the dig- ital display and a sequence of intermittent audible signals are heard.
Examples:
displayed, 5 intermittent audible sig- nals, pause, etc. = level 5
electrolux 7
displayed, 10 intermittent audible signals, pause, etc. = level 10
4.To change the level, press function but- ton A . Each time the button is pressed the level changes. (For the selection of the new level see the chart).
Examples: If the current level is 5, by pressing function button A once, level 6 is selected. if the current level is 10, by pressing function button A once, level 1 is selected.
5.To memorize the operation, switch off the dishwasher by pressing the On/Off but- ton.
Use of dishwasher salt
Warning!
Only use salt specifically designed for use in dishwashers. All other types of salt not spe- cifically designed for use in a dishwasher, es- pecially table salt, will damage the water soft- ener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water into the container
(this is necessary only before filling with salt for the first time) .
3.Using the funnel provided, pour in the salt until the container is full.
4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5.Replace the cap tightly turning it clock- wise until it stops with a click.
Do not worry if water overflows from the unit when filling with salt, this is quite normal.
The salt indicator light on the control panel can remain illuminated for