Electrolux 75011 VIL user manual Select and start a washing programme

Page 25

 

 

 

 

Select and start a washing programme

 

25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programme

 

Degree of

Type of

 

Programme description

Consumption val-

 

 

 

soil

load

 

 

 

 

 

 

 

 

ues 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Prewash

 

Main wash

Intermediate rinse

Final rinse

 

Drying

Duration (minutes)

 

 

Energy (kWh)

Water (litres)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Any

Partial load

 

 

 

 

 

 

 

12

 

 

0,1

 

4

 

 

 

 

(to be com-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pleted later

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in the day)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1)The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.

2)During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C.

3)Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

4)Test programme for test institutes.

5)This programme does not require the use of detergent

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.

2.Check that the water tap is opened.

3.Press the On/Off button. The dishwasher must be in setting mode.

4.Press the button corresponding to the required programme (see "Washing programmes" chart). Close the dishwasher door, the programme starts automatically.

Image 25
Contents Favorit 75011 VIL Dear Customer Contents Installation instructions Correct use Safety informationChild safety General safetyInstallation Product description Multitab Control panelFunction buttons Setting modeDigital display indicates Factory setting audible signals activated Audible signalsFirst use Clarke Mmol/l Set the water softenerSetting electronically Setting manuallyExamples To fill Use of dishwasher saltOnly use branded rinse aid for dishwashers Use of rinse aidDaily use Adjusting the dosage of rinse aidLoad cutlery and dishes Open the door and slide out the baskets to load the dishes Cutlery basket Lower basketCutlery basket can be opened out Upper basket Raising / lowering the upper basket Adjusting the height of the upper basketFill with detergent Use of detergent Detergent tablets Multi-tab functionActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multitab functionAUTO2 Washing programmesSelect and start a washing programme Select and start a washing programmeCancelling a delay start or a washing programme in progress Setting and starting the programme with delay startInterrupt a washing programme in progress Cleaning the filters Care and cleaningUnloading the dishwasher End of the washing programmeClean all filters thoroughly under run- ning water External cleaning Cleaning the spray armsInternal cleaning Frost precautionsMoving the machine What to do if…What to do if… Wash results are not satisfactory Technical dataExample loading arrangements Hints for test institutesPage Fixing to the adjacent units InstallationLevelling Water connection Water inlet hose with safety valveWater supply connections Water outlet hose connection This could constitute a fire hazard through overheating Electrical connectionPackaging material Environment concerns117970170-022008