Electrolux 75011 VIL user manual Setting and starting the programme with delay start

Page 26

26Select and start a washing programme

Setting and starting the programme with delay start

1.After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours.

2.Close the dishwasher door, the countdown starts automatically.

3.The countdown will decrease with steps of 1 hour.

4.The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

5.Once the delay start has elapsed the programme will start automatically.

Once the washing programme has started, a point-shaped optical signal appears on the floor beneath the dishwasher's door.

This optical signal will remain illuminated for all the duration of the washing pro- gramme.

If the appliance has been installed higher up with a furniture door mounted flush, the optical signal will be no longer visible.

WARNING!

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.

Cancelling a delay start or a washing programme in progress

•Simultaneously press and hold the two programme buttons positioned over the word RESET , until all the programme button lights will illuminate.

•Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.

•If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

Interrupt a washing programme in progress

•Open the dishwasher door; the programme will stop. Close the door; the pro- gramme will start from the point at which it was interrupted.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Favorit 75011 VIL Dear Customer Contents Installation instructions Safety information Correct useInstallation General safetyChild safety Product description Control panel MultitabDigital display indicates Setting modeFunction buttons First use Audible signalsFactory setting audible signals activated Set the water softener Clarke Mmol/lExamples Setting manuallySetting electronically Use of dishwasher salt To fillUse of rinse aid Only use branded rinse aid for dishwashersLoad cutlery and dishes Adjusting the dosage of rinse aidDaily use Open the door and slide out the baskets to load the dishes Lower basket Cutlery basketCutlery basket can be opened out Upper basket Adjusting the height of the upper basket Raising / lowering the upper basketUse of detergent Fill with detergentMulti-tab function Detergent tablets Activation/deactivation of the Multitab function Activation/deactivation of the rinse aid dispenserWashing programmes AUTO2Select and start a washing programme Select and start a washing programmeInterrupt a washing programme in progress Setting and starting the programme with delay startCancelling a delay start or a washing programme in progress Unloading the dishwasher Care and cleaningCleaning the filters End of the washing programmeClean all filters thoroughly under run- ning water Internal cleaning Cleaning the spray armsExternal cleaning Frost precautionsWhat to do if… Moving the machineWhat to do if… Technical data Wash results are not satisfactoryHints for test institutes Example loading arrangementsPage Levelling InstallationFixing to the adjacent units Water supply connections Water inlet hose with safety valveWater connection Water outlet hose connection Electrical connection This could constitute a fire hazard through overheatingEnvironment concerns Packaging material117970170-022008
Top Page Image Contents