Electrolux 75011 VIL user manual Hints for test institutes, Example loading arrangements

Page 33

Hints for test institutes	33

Hints for test institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes").

Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").

Full load: 12 standard place settings

Amount of detergent required:	5 g + 25 g (Type B)
Rinse aid setting:	position 4 (Type III)

Example loading arrangements:

Upper basket 1)

Image 33

Contents Favorit 75011 VIL Dear Customer Contents Installation instructions Correct use Safety informationGeneral safety Child safetyInstallation Product description Multitab Control panelSetting mode Function buttonsDigital display indicates Audible signals Factory setting audible signals activatedFirst use Clarke Mmol/l Set the water softenerSetting manually Setting electronicallyExamples To fill Use of dishwasher saltOnly use branded rinse aid for dishwashers Use of rinse aidAdjusting the dosage of rinse aid Daily useLoad cutlery and dishes Open the door and slide out the baskets to load the dishes Cutlery basket Lower basketCutlery basket can be opened out Upper basket Raising / lowering the upper basket Adjusting the height of the upper basketFill with detergent Use of detergentDetergent tablets Multi-tab functionActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multitab functionAUTO2 Washing programmesSelect and start a washing programme Select and start a washing programmeSetting and starting the programme with delay start Cancelling a delay start or a washing programme in progressInterrupt a washing programme in progress Cleaning the filters Care and cleaningUnloading the dishwasher End of the washing programmeClean all filters thoroughly under run- ning water External cleaning Cleaning the spray armsInternal cleaning Frost precautions Moving the machine What to do if…What to do if… Wash results are not satisfactory Technical dataExample loading arrangements Hints for test institutesPage Installation Fixing to the adjacent unitsLevelling Water inlet hose with safety valve Water connectionWater supply connections Water outlet hose connection This could constitute a fire hazard through overheating Electrical connectionPackaging material Environment concerns117970170-022008