Electrolux 50740 manual There are problems with the operation of the dish- washer

Page 31

Operating Instructions

...there are problems with the operation of the dish- washer.

	Symptom	Possible Cause	Solution
		The door of the dishwasher is	Shut the door.
		not closed properly.
	The programme does	Mains plug is not plugged in.	Insert mains plug.
	The programme does	House fuse is defective.	Replace fuse.
	not start.	House fuse is defective.	Replace fuse.
			If dishes are to be washed
		A start delay is selected.	immediately cancel delay
			start timer.
		The washing compartment is	Only wash cutlery and dishes
		made from rust-free stainless	that are suitable for dish-
		steel. Rust spots in the wash-	washer use.
		ing compartment are due to
	Rust spots are visible in	rust particles from external
	the washing compart-	sources (rust particles from
	ment.	water pipes, pans, cutlery,	Close the lid of the special
		etc.). Remove such spots with	Close the lid of the special
		etc.). Remove such spots with	salt container securely.
		one of the stainless steel
		cleaners that are generally
		available on the market.
	There is a whistling	The whistling is not a cause	Use a different brand of
	noise during washing.	for concern.	detergent.

...the wash results are not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were loaded is such a way that the wash waster did not reach all items. The baskets for the dishes must not be overloaded.

–The filter in the base of the washing compartment is dirty or incor- rectly positioned.

–Detergent was not used or too little was used.

–In the case of scale deposits on the dishes: The special salt container is empty or the water softener is incorrectly adjusted.

–The drain hose is incorrectly laid.

The dishes are wet and dull.

–Rinse aid was not used.

–The rinse aid container is empty.

31

Image 31

Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Ning Control panelPanel Prior to using for the first timeAdjust the water softener Your areaIng the appropriate button Dishwasher must be switched offManual setting Electronic settingTurning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower BasketRinse aid To switch off the control indicator for rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aidDaily Use Adjusting Rinse Aid DosingNot be washed in the dishwasher Loading Cutlery and DishesLoading Cutlery Two right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses and Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentAddition Selecting the Wash Programme Programme TableOpen the door carefully Start the wash programmeInterrupting or ending the wash programme WasherPause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timerEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Sive cleanersStances Cleaning the FilterWhat to do, if Fault warnings are displayedDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyLower rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangementsFree-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG