Installation and Connection Instructions
INSTALLATION AND CONNECTION INSTRUCTIONS
Installing the Dishwasher
•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.
• To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing:
– use a screwdriver.
• For
• The drain hose, inlet hose and mains cable must be laid such that
| they are free to move in the rear of the plinth recess, so that they |
| cannot be kinked or crushed. |
|
|
| (see enclosed installation instructions) |
|
|
| can be set up as |
1 | If the dishwasher is set up next to a gas or coal cooker, a heat- |
| insulating, |
dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm). The plate should have aluminium foil on the side fac- ing the cooker.
34