Electrolux Santo 1573TK-4 operating instructions Changing over the freezer compartment door

Page 10

Installation

0Unscrew the handle. Refit it on the

opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack.

Changing over the freezer compartment door

0Open the freezer compartment door a little way.

0Using a small screwdriver, pess the spring in the opening of the lower door bearing slightly upwards and take the door bearing out complete with the door.

0Turn the covering cap (M) round.

0Turn the freezer compartment door

through 180° and fit the lower door bearing into the lower bearing cavity of the freezer compartment

door.

0 Lift the freezer compartment door

a little way upwards, fit it into the

upper door bearing, and at the same time insert the lower door bearing into the square hole. Small

upwards and downwards adjustments of the freezer compartment door will make fitting easier.

10

Image 10

Contents ÖKO-SANTO Super Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDaily Operation Case of malfunctionAppliance Packaging Information Remove transport safeguardDisposal Disposal of old AppliancesInstallation Installation LocationYour refrigerator needs air Special accessoriesDetaching the worktop Mounting under a continuous worktop Rehingeing the doorChanging over the freezer compartment door Open the freezer compartment door a little wayPrior to Initial Start-Up Electrical ConnectionSetting „1 means Starting up and temperature regulationSetting „0 means Off Plug socketInterior Accessories Storage shelves/wire traysCorrect storage Vario glass storage shelfFreezing and storing frozen food TipsFridge defrosts automatically Preparation of Ice CubesDefrosting Defrosting the freezer compartmentSwitching off the appliance Cleaning and Care Energy Saving Tips What to do if Correcting MalfunctionsWhat to do if Changing the light bulb Customer Service Regulations, Standards, Guidelines