Electrolux Santo 1573TK-4 operating instructions Changing the light bulb

Page 22

What to do if ...

Changing the light bulb

1Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.

Light bulb data: 220-240 V, max. 15 W

0To switch off the appliance, turn the temperature regulator to position "0".

0Unplug the mains plug.

0To change the light bulb, undo the screw.

0Press the light bulb cover as shown and slide it backwards.

0 Change the defective light bulb.

0 Refit the light bulb cover and the screw.

0Put the refrigerator back into operation.

22

Image 22

Contents ÖKO-SANTO Super Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDaily Operation Case of malfunctionAppliance Packaging Information Remove transport safeguardDisposal Disposal of old AppliancesInstallation Installation LocationYour refrigerator needs air Special accessoriesDetaching the worktop Mounting under a continuous worktop Rehingeing the doorChanging over the freezer compartment door Open the freezer compartment door a little wayPrior to Initial Start-Up Electrical ConnectionSetting „1 means Starting up and temperature regulationSetting „0 means Off Plug socketInterior Accessories Storage shelves/wire traysCorrect storage Vario glass storage shelfFreezing and storing frozen food TipsFridge defrosts automatically Preparation of Ice CubesDefrosting Defrosting the freezer compartmentSwitching off the appliance Cleaning and Care Energy Saving Tips What to do if Correcting MalfunctionsWhat to do if Changing the light bulb Customer Service Regulations, Standards, Guidelines