Electrolux Santo 1573TK-4 operating instructions Interior Accessories, Storage shelves/wire trays

Page 13

If you require a lower temperature, select setting „3“ or „4“. On this setting, you can be sure the fresh food will be reliably frozen and that a storage temperature of -18°C will be maintained in the freezer compartment.

If you want the freeze fresh food rapidly, select setting „6“, ensuring that the temperature in the refrigerator compartment does not drop blow 0°C. You should also promptly reset the temperature regulator to setting „3“ or „4“.

Important!

High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature regulator (position"5" to "6") can cause the compressor to run continuously.

Reason: when the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance. The fridge will not be able to defrost since automatic defrosting of the fridge is only possible when the compressor is not running (see also "Defrosting" section). The result is the build up of a thick layer of frost on the fridge rear wall.

If this happens, turn the temperature regulator back to a warmer setting (position "3" to "4"). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced.

Interior Accessories

Storage shelves/wire trays

Various glass or plastic storage shelves and wire trays are included with your appliance - different models have different combinations.

0You should always slide one of the full size glass storage shelf into the lowest set of guides, above the fruit and the vegetable containers, and keep it in this position.

The height of the storage shelves can be adjusted:

0To do this pull the storage shelf forward until it can be swivelled upwards or downwards and removed.

0Please do the same in reverse to insert the shelf at a different height.

13

Image 13
Contents ÖKO-SANTO Super Dear customer Contents Safety of children SafetyIntended use Prior to initial start-upCase of malfunction Daily OperationDisposal Remove transport safeguardAppliance Packaging Information Disposal of old AppliancesInstallation Location InstallationYour refrigerator needs air Special accessoriesDetaching the worktop Rehingeing the door Mounting under a continuous worktopOpen the freezer compartment door a little way Changing over the freezer compartment doorElectrical Connection Prior to Initial Start-UpSetting „0 means Off Starting up and temperature regulationSetting „1 means Plug socketStorage shelves/wire trays Interior AccessoriesVario glass storage shelf Correct storageTips Freezing and storing frozen foodDefrosting Preparation of Ice CubesFridge defrosts automatically Defrosting the freezer compartmentSwitching off the appliance Cleaning and Care Energy Saving Tips Correcting Malfunctions What to do ifWhat to do if Changing the light bulb Regulations, Standards, Guidelines Customer Service