Electrolux Santo 1573TK-4 Mounting under a continuous worktop, Rehingeing the door

Page 9

Installation

Mounting under a continuous worktop

If installed under a continuous worktop, the appliance is fastened with a mounting screw (A) under the panel.

Rehingeing the door

The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.

1Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.

0Tilt the appliance slightly towards the rear and drop it securely.

0Unscrew the door hinge screws (K)

and take the door bearing (1) downwards out of its cavity.

0 Open the door a little way and take it out downwards.

0Unscrew the upper pin (A) and srew it into place on the opposite side.

0Fit the door into the upper pin (A) and close it.

0Insert the pin of the door bearing

(1) into the left hand cavity and screw the bearing firmly into place with the screws (K).

9

Image 9
Contents ÖKO-SANTO Super Dear customer Contents Safety of children SafetyIntended use Prior to initial start-upCase of malfunction Daily OperationDisposal Remove transport safeguardAppliance Packaging Information Disposal of old AppliancesInstallation Location InstallationSpecial accessories Your refrigerator needs airDetaching the worktop Rehingeing the door Mounting under a continuous worktopOpen the freezer compartment door a little way Changing over the freezer compartment doorElectrical Connection Prior to Initial Start-UpSetting „0 means Off Starting up and temperature regulationSetting „1 means Plug socketStorage shelves/wire trays Interior AccessoriesVario glass storage shelf Correct storageTips Freezing and storing frozen foodDefrosting Preparation of Ice CubesFridge defrosts automatically Defrosting the freezer compartmentSwitching off the appliance Cleaning and Care Energy Saving Tips Correcting Malfunctions What to do ifWhat to do if Changing the light bulb Regulations, Standards, Guidelines Customer Service