Electrolux ZKS5653 user manual Control panel, Installation

Page 4

Installation

Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier.

All packaging must be removed before use.

Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.

For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.

Never use the dishwasher if the electrical supply cable and water hoses are damaged;

Control panel

or if the control panel, work top or plinth area are damaged such that the inside of the ap- pliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.

All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

WARNING!

For electrical and water connection carefully follow the instructions given in specific para- graphs.

1Programme selector dial and On/Off switch

2Start/cancel button

3Indicator lights

4Programme selector indicator light

4

Image 4
Contents Dishwasher ZKS5653 Contents Safety information General safetyChild safety Correct useInstallation Control panelCancel the washing programme in progress Indicator lightsEnd of programme indicator light Starting the washing programmeSalt refilling indicator light Washing programmesDegree of soil Type of loadFirst use When using tablets that integrate rinse aid and detergentSet the water softener Water hardness Mmol/l Setting the water softener manually see tableUse of salt Setting the water softener electronically see table Filling with dishwasher saltOnly before filling with Salt for the first time, fillFilling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishesAre of limited suitability Adjusting the height of the upper basket Maximum height of the dishesUpper basket Lower basketUse of detergent Unloading the dishwasherCare and cleaning Cleaning the filtersCleaning the spray arms External cleaningEnvironmental concerns Possible cause and solution Fault code and malfunctionSomething not working Programme does not start Technical data Wash results are not satisfactoryConsumption values Full load 12 standard place settingsHints for test institutes Installation Water inlet hose with safety valveWater connection Cup racks position aPlastic membrane a Drain hoseMust be removed . Fail Fitting under a counter Electrical connectionLevelling 156994870-00-20072007 Subject to change without notice